explorer.exe - The memory could not be read. On shutdown/reboot

[das3erawsdas]

I plugged this pc and formatted disk in uefi.

13900K stock

2x16 GB DDR5 GSKILL 6800

Rtx 4090 Gigabyte Gaming

Aorus Elite Z790 AX

SSD KINGSTON 2TB

Seasonic 1300W PX ATX 3.0 PCIE 5.



Today i rebooted pc by shutdown button in start menu and this popped:

explorer.exe - application error

The instruction at 0x00007FFD4938C34B referenced memory at

0x0000000000000008. The memory could not be read.

Is my pc stable? I dont oc pc,all stock.Should i check RAM BY KARHU RAMTEST?

[emoticorpse]

Use memtest? But yeah any memory testing should be done?

[das3erawsdas]

running karhu ram test, its ok?

https://www.karhusoftware.com/ramtest/

[das3erawsdas]

I closed all background programs and then shutdown/reboot no more that error. Maybe it was some conflict or something is wrong?

[das3erawsdas]

no errors in karhu ram test , maybe try memtest?

[das3erawsdas]

Someone on reddit said this to me:"
6800 MT/s isn’t trivial to run on a 4 DIMM motherboard. Run y-cruncher VST and see if you get errors after an hour or two. If you do, bump down to 6600 MT/s and repeat. Lots of info on r/overclocking on this “issue”.


So it can be memory?

[Bad 💀 Motha]

But only using 2 dimms shouldn't have this problem. But not all RAM or Motherboard are perfect either. Try using the spec rated DRAM XMP Profile setting. If that proves unstable, return the RAM and get something a little lower in speed