Steam 설치
로그인
|
언어
简体中文(중국어 간체)
繁體中文(중국어 번체)
日本語(일본어)
ไทย(태국어)
Български(불가리아어)
Čeština(체코어)
Dansk(덴마크어)
Deutsch(독일어)
English(영어)
Español - España(스페인어 - 스페인)
Español - Latinoamérica(스페인어 - 중남미)
Ελληνικά(그리스어)
Français(프랑스어)
Italiano(이탈리아어)
Bahasa Indonesia(인도네시아어)
Magyar(헝가리어)
Nederlands(네덜란드어)
Norsk(노르웨이어)
Polski(폴란드어)
Português(포르투갈어 - 포르투갈)
Português - Brasil(포르투갈어 - 브라질)
Română(루마니아어)
Русский(러시아어)
Suomi(핀란드어)
Svenska(스웨덴어)
Türkçe(튀르키예어)
Tiếng Việt(베트남어)
Українська(우크라이나어)
번역 관련 문제 보고
As I said, I want to get another pair of the ram that I have currently. I also mentioned its exact model.
Yeah but how do I do that. What do I look for?
F4-3200C14D-16GTZR, F4-3200C16D-16GTZR, F4-3200C14D-16GTZRX or F4-3200C16D-16GTZRX? But it's most likely single rank.
These were the exact two I was going to mention for software.
The memory itself might also have this information on it. It might have "1Rx#" or "2Rx#" with the "#" being a number. 1R would be single rank and 2R would be dual rank.
Lastly, you can look your memory up online and try and find out, but this might be inconclusive. You'll need to know your EXACT memory, not just the name. "G.Skill Trident Z RGB" might not be enough. You'll want to look up your exact part number, like for G.Skill will be something like "F4-3600C16-16GVKC" is what you need (to break this down, AFAIK, F4 means DDR4, the next part is the frequency and first timing [there may be a D or Q letter following this signifying if it cam in a kit of two or four modules], the next is the single module capacity size, and the final three of four letters are the specific part number). And it has to be exact. My "F4-3600C16-16GVKC" (SK Hynix ICs) isn't the same as "F4-3600C16-16GVK" (Samsung ICs I think) so make sure you have it exact if you go this route. So your part number is probably something like F4-3200Cxx(D)-8xxx (X being unknown, and the D likely showing up for the kit specs but not for individual module specs).
I would think 8GB is too low for a DDR4 module to have more than 1 Rank. G.Skill Trident is a good quality brand, and we are well past the era of low capacity DDR3 surpluses.
2 Rank memory tends to be used for higher total capacities. I would expect dual rank to not be used before 32GB per module minimum, and is likely required to extend capacity beyond the 64GB spec.
Take a look at the Hynix 128GB module (HMAA4GU6AJR8N-XN):
https://www.newegg.com/hynix-128gb-288-pin-ddr4-sdram/p/0RN-00BX-000M9
Likely true. Earlier 8 GB modules for DDR4 might be more likely to be dual rank, but unlikely for anything remotely recent. But like the above, it's better to just research and be sure rather than assuming a given capacity or that being single-side or dual-side implies anything.
My 16 GB modules are dual rank. I'd actually say a large number of 16 GB modules (for DDR4) may be dual rank, outside recent ones which are more likely to possibly be single rank
Woah, that's expensive for 128 GB.
https://www.newegg.com/g-skill-128gb-288-pin-ddr4-sdram/p/N82E16820232944
https://www.newegg.com/g-skill-64gb-288-pin-ddr4-sdram/p/N82E16820374003 (x2 obviously)
Nothing super fancy for timings or tuning potential, but neither is that other set. Not sure why it's four figures, haha.
FYI Thaiphoon Burner is very simplistic and very frequently showing incorrect information. It does not actually inspect or probe the memory modules; it simply looks up the SPD tables and the XMP tables and then uses that information to do a lookup in its database, which is often incorrect.
https://i.imgur.com/oB6w5SY.png