Can someone tell me if this prebuild will overheat ?

[El XUPO ♿]

Hello im intersted in this coolmod PC ive seen and my only question is if it would overheat ? i will be playing it in 1080p Ultra settings mostly and for long gaming sessions, thanks:

This is the PC in question: https://www.coolmod.com/coolpc-gamer-xiii/
Here is resumed:

-Intel Core i5-13600K 5.1GHz Socket 1700 Boxed

-Kingston Fury Beast 16GB (1x16GB) 3200MHz (C4-25600) CL16

-Asus Prime B760-PLUS D4 Socket 1700

-Asus Dual GeForce RTX 4060 Ti Gaming 8GB GDDR6 DLSS3

-Corsair MP600 PRO GS 1TB Gen4 PCIe x4 NVMe Bulk

-Lian Li Lancool 205 Mesh Blanco

-Cooler Master MasterLiquid ML240L V2 RGB

-Cooler Master G Gold 80 Plus Gold 700W Bulk

[emoticorpse]

I think the answer is no, like "nobody can tell you". It probably should be fine if the parts operated normally and it was setup right, but pretty sure there's just way too many variables for anyone to predict exactly how it will perform. This probably gets even more complicated with the passing of time.

[[☥] - CJ -]

240 rad, so it shouldnt.

[El XUPO ♿]

Publicado originalmente por emoticorpse:

I think the answer is no, like "nobody can tell you". It probably should be fine if the parts operated normally and it was setup right, but pretty sure there's just way too many variables for anyone to predict exactly how it will perform. This probably gets even more complicated with the passing of time.

I see, thanks for detailing it

[kiwikev]

1x16BG ram will hurt performance and unlocked CPU in a locked MB is a bad choice to me.

[[☥] - CJ -]

Publicado originalmente por kiwikev:

1x16BG ram will hurt performance and unlocked CPU in a locked MB is a bad choice to me.

True for the RAM
But the CPU has a higher base clock and turbo of 5.1GHz, so id say its kind of irrelevant these days. Before 5.1GHz became the norm i would have agreed with you though.

[El XUPO ♿]

Publicado originalmente por ☥ - CJ -:

Publicado originalmente por kiwikev:

1x16BG ram will hurt performance and unlocked CPU in a locked MB is a bad choice to me.

True for the RAM
But the CPU has a higher base clock and turbo of 5.1GHz, so id say its kind of irrelevant these days. Before 5.1GHz became the norm i would have agreed with you though.

I didnt really understand, should i be worried ?

[El XUPO ♿]

Publicado originalmente por smallcat:

That thing will cost a lot of money and deserves something better than Prime mobo of Asus . Cannot find for this mobo but VRMs of some Prime mobos of Asus tend to overheat

What does that mean ?

[El XUPO ♿]

Publicado originalmente por smallcat:

When the VRMs overheats this can throttle the CPU (reduce the CPU speed and stability ) or shut down and shorten the lifespan of the mobo .as well

Then i shouldnt consider this PC ? im not sure whats mobo or VRMs

[El XUPO ♿]

Publicado originalmente por smallcat:

mobo stands for motherboard , in short . VRMs - voltage regulator modules

Ok thanks but should i look for another PC ? im not sure how much of a problem could this be

[El XUPO ♿]

Publicado originalmente por smallcat:

Just ask them whether they could change the mobo . The other parts are good .

Since is a prebuild is not posible

[[☥] - CJ -]

I personally dont see a problem with it.

But you would be better off with 2x8GB RAM instead of 1x16GB RAM stick
With only the one RAM stick you'll lose some performance, but over all it'd be just fine.

[Rod]

Coolermaster parts suck. Anyone who builds would use the freezer II they are super cheap and better. I made that mistake on my recent build and im not a pro builder it was the one mistake i made.

280mm - 360mm Freezer II pro
Corsair Shift 750w-850w
16gb ram massive mistake 32gb is 100 dollars

[[☥] - CJ -]

Well the V1 got good reviews, so the V2 should be decent as well.
Yeah, it'll do just fine.

[Rumpelcrutchskin]

It`s junk.
Motherboard is not good for K-series 13th gen and uses old DDR4 RAM.
Only one stick of old DDR4 RAM when 2x16 GB 6000 Mhz DDR5 cost $100. No faster dual-channel effect with only one stick.
With how cheap 2 TB NVME SSDs are recently the 1TB is kinda lacking.
RTX 4060 series are a joke, too expensive for the crappy performance you get and these days you would really want at least 12 GB VRAM.

[[☥] - CJ -]

You are putting too much into the differences between DDR4 and DDR5
Either one works and does the job just fine.

The motherboard is just fine for that CPU, sure you cant freely overclock with it, but lets be serious here

He wont be trying to reach speeds above 5.1GHz
As i said, thats kinda pointless now when CPUs come with those speeds out of the box these days WITHOUT having to actually overclock to do so

The board is just fine.

The only thing i agree with is not having 2 RAM sticks for dual channel
other than that everything else is irrelevant.