Elite Yard Master or Elite Yard Master Plus projector screen

[River]

Does anyone else own one of these screens ? Just asking mainly.

What size and did your screen have any creases or wrinkles at first when you set it up at the beginning the first day ?

Anyway to get rid of them or you just have to wait a few days or weeks ?

[Bad 💀 Motha]

https://elitescreens.com/faqs/outdoor-projector-screens-faqs

Quotes from various outdoor fabric screen makers:

Wrinkles or lines found on the Yard Master projection material in most cases disappear when the material is stretched over the frame. If in case they don't, we recommend using a fabric steamer to eliminate any lines or wrinkles.

Applying tension to a projector screen may also help remove wrinkles. Attaching some additional weight to the bottom of a pull-down or portable screen can increase the tension enough to smooth imperfections, or mount the screen to a tension frame for prolonged stretching.

Once you it stretched properly with tension and display your image/video onto the screen. Those imperfections should be very much less noticeable, if seen at all at this point.

[River]

What about a hair dryer or not recommended ?

[Bad 💀 Motha]

Have you actually setup the screen at any point yet?
Again you might see the imperfections up close, but at a distance, with a projector playing a movie, after you'd properly set it up with it being stretched and having tension applied. Highly doubt you will ever notice those afterwards.

[River]

Ursprünglich geschrieben von Bad 💀 Motha:

Have you actually setup the screen at any point yet?
Again you might see the imperfections up close, but at a distance, with a projector playing a movie, after you'd properly set it up with it being stretched and having tension applied. Highly doubt you will ever notice those afterwards.

Yes.

Why?

Though I do see them sometimes even during showtime :(

[Bad 💀 Motha]

Then if possible, leave it up longer and the tension should resolve the issues over a bit of time. Yes you could try a blow-dryer on the areas for a bit to see if this helps. Just don't apply too much heat in one area for too long.

[River]

Ursprünglich geschrieben von Bad 💀 Motha:

Then if possible, leave it up longer and the tension should resolve the issues over a bit of time. Yes you could try a blow-dryer on the areas for a bit to see if this helps. Just don't apply too much heat in one area for too long.

How long max to put blow dryer on one area ?

[River]

Hmm