Installa Steam
Accedi
|
Lingua
简体中文 (cinese semplificato)
繁體中文 (cinese tradizionale)
日本語 (giapponese)
한국어 (coreano)
ไทย (tailandese)
Български (bulgaro)
Čeština (ceco)
Dansk (danese)
Deutsch (tedesco)
English (inglese)
Español - España (spagnolo - Spagna)
Español - Latinoamérica (spagnolo dell'America Latina)
Ελληνικά (greco)
Français (francese)
Indonesiano
Magyar (ungherese)
Nederlands (olandese)
Norsk (norvegese)
Polski (polacco)
Português (portoghese - Portogallo)
Português - Brasil (portoghese brasiliano)
Română (rumeno)
Русский (russo)
Suomi (finlandese)
Svenska (svedese)
Türkçe (turco)
Tiếng Việt (vietnamita)
Українська (ucraino)
Segnala un problema nella traduzione
any dp cable will support 144hz
dual link dvi-d will also support 144hz
hdmi does not
single link dvi-d does not
On wiki, it says Displayport version 1.0 and 1.1 dose not support 144hz.
yes the port not the cable you need 1.2 for support up to 1440p max with 144hz and 1.3 for 4k 144hz
it will work at the lower of the gpu or monitor spec
If you look at the date, not only will you see that you necro'd a thread, but you'd also see that only 1.2a was the latest standard at the time.
As far as bandwidth goes, the last version to increase bandwidth was 1.2. Considering that 1.1 has long since been replaced and all that... yeah, pretty much any DP cable at the time (typical 1.2 and 1.2a) was (is) more than acceptable for 144hz, especially considering that the highest res at the time to have 144hz support was 1440p.
All that said... It is in the cable. Unless you get a reduced bit rate cable, they are all the same. The port standard changed, not the cable.
Here is a little article from someone at VESA.
https://www.displayport.org/cables/how-to-choose-a-displayport-cable-and-not-get-a-bad-one/
Welcome to Steam Discussions... might want to check the date next time.