darkness Aug 26, 2016 @ 4:38am
what is the best case for an h115i
i got an h115i and it doesnt fit my case so now i need a cool new one that the h115i will fit in not too concerned about money if it came in red that would be great but not necessary
Last edited by darkness; Aug 26, 2016 @ 4:42am

Something went wrong while displaying this content. Refresh

Error Reference: Community_9708323_
Loading CSS chunk 7561 failed.
(error: https://community.fastly.steamstatic.com/public/css/applications/community/communityawardsapp.css?contenthash=789dd1fbdb6c6b5c773d)
Showing 1-12 of 12 comments
Arya Aug 26, 2016 @ 4:40am 
That's... the 360mm model isn't it?

Do you want Top or Front mount?
darkness Aug 26, 2016 @ 4:43am 
Originally posted by Okami:
That's... the 360mm model isn't it?

Do you want Top or Front mount?
not even suure probably top? im new to water cooling
Last edited by darkness; Aug 26, 2016 @ 4:43am
darkness Aug 26, 2016 @ 4:44am 
Originally posted by friberg:
Originally posted by Okami:
That's... the 360mm model isn't it?

Do you want Top or Front mount?
not even suure probably top? im new to water cooling
its 280mm radiator
Arya Aug 26, 2016 @ 4:46am 
Originally posted by friberg:
Originally posted by friberg:
not even suure probably top? im new to water cooling
its 280mm radiator

Excellent, that makes my job a whole lot easier.
darkness Aug 26, 2016 @ 4:48am 
Originally posted by Okami:
Originally posted by friberg:
its 280mm radiator

Excellent, that makes my job a whole lot easier.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835181100&cm_re=h115_i-_-35-181-100-_-Product its this one and i was looking at corsair cases unless you have something else in mind i looked at the c70 vengeance and 780t
Bad 💀 Motha Aug 26, 2016 @ 4:50am 
Pretty much any case that supports two 140mm fans side by side at the top should work out ok. Just ensure it has some extra room between the Motherboard plate and the top of the case. Like when looking at the rear of the case, it should have a somewhat decent gap between the I/O plate and the top of the case, at least 3inches from I/O shield to the top of case.
Arya Aug 26, 2016 @ 4:50am 
Corsair makes great cases. The only one I would suggest from another brand is the Cooler Master Master Case Maker 5. Another ridiculously long name from Cooler Master, but a fairly sexy looking case and has superb cooling.

http://www.newegg.com/global/au/Product/Product.aspx?Item=N82E16811119306&cm_re=Cooler_Master_Master_Case-_-11-119-306-_-Product

Key point is, the MCM5 is only an ATX tower but can carry large radiators. It's one of the smaller cases that'll fit your spec.
Last edited by Arya; Aug 26, 2016 @ 4:52am
_I_ Aug 26, 2016 @ 4:51am 
h115i is 280mm, can use 120 or 140mm fans
its thicker than the h60-110, 26mm, and fans are 25+ spacers, totals about 55mm thick

check the case area and mobo, it may run into ram or odd bay
Bad 💀 Motha Aug 26, 2016 @ 4:52am 
Use a Case that has no 5.25 bays; that way you can have too intake airflow blowing right at the upper motherboard areas. Easier to install and accommodate varies rads and such too.

like Corsair Spec Alpha
Last edited by Bad 💀 Motha; Aug 26, 2016 @ 4:53am
Rumpelcrutchskin Aug 26, 2016 @ 4:53am 
http://www.newegg.com/Product/Product.aspx?Item=N82E16811854003

It has lot of room on top for radiators, can fit 240mm, 280mm, 360mm.
Bad 💀 Motha Aug 26, 2016 @ 4:58am 
Last edited by Bad 💀 Motha; Aug 26, 2016 @ 4:58am
[☥] - CJ - Aug 26, 2016 @ 5:38am 
i'm a fan of the Corsair 750D Air Edition and 900D
Last edited by [☥] - CJ -; Aug 26, 2016 @ 5:41am
Showing 1-12 of 12 comments
Per page: 1530 50

Date Posted: Aug 26, 2016 @ 4:38am
Posts: 12