EVGA RTX 3080 FTW3 OC profile
Recently I purchased this card and was thinking about flashing the XOC bios to the OC profile. This is a dumb question, but I was wondering to switch between the normal and oc profile the PC should be turned off correct?
İlk olarak gönderen kişi: Komarimaru:
Per EVGA.

You should power down completely before touching the switch. If you wanna flash the bios, back it up first. Ideally the best way is shut down pc, unplug pc from power, hold pc power button for 15 seconds to drain any power from mobo, gpu, and then switch bios switch plug pc in and boot.

OC profile is just a different fan curve setting, so good to use for Bios flashing.

From personal experience though, do be careful using modified bios's. I have one on my 3080ti I play around with for benchmarks, peaked at 518 watts power draw in Port Royal and had temp limits removed so was hitting 75C at times with fan speed at 100%

Good to fiddle and toy with, but would not recommend unless water cooling.
< >
1 yorumdan 1 ile 1 arası gösteriliyor
Bu konunun sahibi, bu iletinin ilk konuyu cevapladığını belirtti.
Per EVGA.

You should power down completely before touching the switch. If you wanna flash the bios, back it up first. Ideally the best way is shut down pc, unplug pc from power, hold pc power button for 15 seconds to drain any power from mobo, gpu, and then switch bios switch plug pc in and boot.

OC profile is just a different fan curve setting, so good to use for Bios flashing.

From personal experience though, do be careful using modified bios's. I have one on my 3080ti I play around with for benchmarks, peaked at 518 watts power draw in Port Royal and had temp limits removed so was hitting 75C at times with fan speed at 100%

Good to fiddle and toy with, but would not recommend unless water cooling.
En son Komarimaru tarafından düzenlendi; 16 Kas 2022 @ 12:05
< >
1 yorumdan 1 ile 1 arası gösteriliyor
Sayfa başına: 1530 50

Gönderilme Tarihi: 16 Kas 2022 @ 11:57
İleti: 1