No Video Configuration in BIOS

[Hue Neutron]

When I enter BIOS, I can't find any option to select the PCI slot instead of my Integrated graphics card. What can I do?

[Dr.Shadowds 🐉]

You don't select video in the BIOS, you do it within windows settings. Also just unplug it and plug it into your GPU.

[Hue Neutron]

I'm gonna sound stupid asking this, but what do I unplug and plug into my GPU?

[Dameon]

Messaggio originale di Castiel:

I'm gonna sound stupid asking this, but what do I unplug and plug into my GPU?

That was stupid lol. Plug into the 16x PCIE slot.Screw it in and plug the 6 pin(or how many pins you need) power plug into the video card. Start PC and download Drivers. Intergated video card on the cpu should auto-turn-off.

[_I_]

plug the monitor into the gpu not the mobo
boot to bios and disalbe the intel hd

[Hue Neutron]

I feel a little better about myself since it actually doesn't have a 6pin cord, the gpu just goes into the PCI slot and draws the power from the motherboard.

[Hue Neutron]

Messaggio originale di _I_:

plug the monitor into the gpu not the mobo
boot to bios and disalbe the intel hd

I don't have the option to disable it though, thats the main problem

[Dameon]

Messaggio originale di Castiel:

I feel a little better about myself since it actually doesn't have a 6pin cord, the gpu just goes into the PCI slot and draws the power from the motherboard.

.... What? is this a laptop or?...

[_I_]

if its a notebook you cannot disable the intel hd

the nvidia gpu writes to the intel hd frame buffer for the intel hd to display

[Hue Neutron]

No it's a desktop. The card is a Zotac 750ti 2gb

[_I_]

what mobo?

post a cpuz validation link
http://www.cpuid.com/softwares/cpu-z.html
cpuz -> validate button -> submit button
it will open a browser, copy the url (address) and paste it here

[Hue Neutron]

http://valid.canardpc.com/
I'm pretty sure I didn't do this right :/

[Alexalmighty]

Messaggio originale di Castiel:

http://valid.canardpc.com/
I'm pretty sure I didn't do this right :/

yeah it didnt work try again :p

[Hue Neutron]

Its a Pegatron model 2AC2

[Dr.Shadowds 🐉]

> Run CPUZ.
> Bottom right click the validate button then a new window will open.
> Bottom right click the submit button, wait a minute, then your broswer will open up for you.
> Copy the whole link from the address on the broswer.
> Paste link whole link in your post.

http://i.imgur.com/aJIzuos.png

Shortest guide I can find on youtube.

https://www.youtube.com/watch?v=FmYavyyBtGk

[Hue Neutron]

http://valid.x86.fr/bfrlqm