Overclocking 5600G graphics

[yeeyoh]

Hi,
Can someone direct to a good guide for overclocking the graphics on a AMD 5600G.
I briefly tried using ryzen master but I found that it would load the settings on start up and the CPU and graphics would run at 100% full time. I like to keep my fan noise down so I like the fact that windows throttles evey down when not in use. What I want to do is just raise the top end of the graphics from 1900 to 2000 or 2100. My cpu runs very cool, using a cooler master hyper 212.
So I have a 5600G cpu an asus Prime II motherboard.
Any help would be really appreciated.

[A&A]

Showing the iGPU to be running at 100% full time does not mean it is at 100%.

[yeeyoh]

Początkowo opublikowane przez A&A:

Showing the iGPU to be running at 100% full time does not mean it is at 100%.

Maybe I should have clarified... Using a program like HWmonitor, I could see that the Cpu was at
4450 Mhz all the time.. I'm sure in task manager the cpu was not using 100% of it's resources, all the more reason I don't really want to run it at 4450Mhz (Aprox.) all the time... the same for the GPU running at 1900 Mhz

[A&A]

and the effective clock?

[yeeyoh]

Początkowo opublikowane przez A&A:

and the effective clock?

Not really sure what you mean.... I'm looking for a guide to overclock the GPU (or Igpu) on the AMD 5600G cpu.

[Soulreaver]

Początkowo opublikowane przez yeeyoh:

Początkowo opublikowane przez A&A:

and the effective clock?

Not really sure what you mean.... I'm looking for a guide to overclock the GPU (or Igpu) on the AMD 5600G cpu.

The effective clock shows you the real clocknumbers. They are mostly generaly just a bit lower then what is shown usualy but can sometimes be helpfull to indicate bottlenecks or similar.

[yeeyoh]

Początkowo opublikowane przez Soulreaver:

Początkowo opublikowane przez yeeyoh:

Not really sure what you mean.... I'm looking for a guide to overclock the GPU (or Igpu) on the AMD 5600G cpu.

The effective clock shows you the real clocknumbers. They are mostly generaly just a bit lower then what is shown usualy but can sometimes be helpfull to indicate bottlenecks or similar.

Okay, I've done a little reading on-line and think I know what you mean by effective clock. I really don't have a way to find that out. I have HWMonitor and CPUID installed. I uninstalled ryzen master quite a long time ago.
I'm really looking for a guide that would allow me to get a slight overclock in the bios, that would still allow everything (CPU/GPU) to run a bit slower when not heavily in use. I hesitate to just go exploring through the Bios on my own, without some guidance.

[ZAP]

Advanced CPU Settings in a tweaker section or the AMD Overclocking section, the one with a disclaimer. Infinity fabric and DRAM speed is just as important as IGP though.

[ZAP]

There's this but it'd be easier just to walk through with someone lol https://www.youtube.com/watch?v=Ou8PDY-HnOM

Here's my 5700G
https://steamcommunity.com/sharedfiles/filedetails/?id=2724231407

[yeeyoh]

I've gone into the bios and tried something very basic using the overdrive settings.