Zainstaluj Steam
zaloguj się
|
język
简体中文 (chiński uproszczony)
繁體中文 (chiński tradycyjny)
日本語 (japoński)
한국어 (koreański)
ไทย (tajski)
български (bułgarski)
Čeština (czeski)
Dansk (duński)
Deutsch (niemiecki)
English (angielski)
Español – España (hiszpański)
Español – Latinoamérica (hiszpański latynoamerykański)
Ελληνικά (grecki)
Français (francuski)
Italiano (włoski)
Bahasa Indonesia (indonezyjski)
Magyar (węgierski)
Nederlands (niderlandzki)
Norsk (norweski)
Português (portugalski – Portugalia)
Português – Brasil (portugalski brazylijski)
Română (rumuński)
Русский (rosyjski)
Suomi (fiński)
Svenska (szwedzki)
Türkçe (turecki)
Tiếng Việt (wietnamski)
Українська (ukraiński)
Zgłoś problem z tłumaczeniem
Essentially
Any Coax Cable hookup that is connected to your main Internet/TV service inline Cable will be a viable hookup point for the Modem.
You can also try a new cable going from the wall to the modem, see if that makes any difference before you decide to move the modem.
sat is offten tied to one outlet or jack on the sat splitter
look at the cable splitters, if they are all the same style with no designated outlet it can be swapped to another location
if ti does not work, move it back, then contact support
If the internet is bundled with tv there is probably a splitter involved to hook up 2 or more lines at once. Same deal though. Unplug the one for the current internet room and plug in the one for the new room.
If you're lucky, it's an exposed ceiling and you can see where each cable runs. If not, just plug the modem in where you want it and try different cables until the modem sees an internet signal.
If the cables are all hidden now (like if the ceiling has since been drywalled), you can look into powerline adapters. They allow you to use electrical wiring to carry internet.