Installer Steam
log på
|
sprog
简体中文 (forenklet kinesisk)
繁體中文 (traditionelt kinesisk)
日本語 (japansk)
한국어 (koreansk)
ไทย (thai)
Български (bulgarsk)
Čeština (tjekkisk)
Deutsch (tysk)
English (engelsk)
Español – España (spansk – Spanien)
Español – Latinoamérica (spansk – Latinamerika)
Ελληνικά (græsk)
Français (fransk)
Italiano (italiensk)
Bahasa indonesia (indonesisk)
Magyar (ungarsk)
Nederlands (hollandsk)
Norsk
Polski (polsk)
Português (portugisisk – Portugal)
Português – Brasil (portugisisk – Brasilien)
Română (rumænsk)
Русский (russisk)
Suomi (finsk)
Svenska (svensk)
Türkçe (tyrkisk)
Tiếng Việt (Vietnamesisk)
Українська (ukrainsk)
Rapporter et oversættelsesproblem
What was the BIOS issue you mentioned?
X570 Tomahawk
You can disable this so that after your PC does the initial POST + Boot, the LEDS go off and stay off.
Since you have a Ryzen 3600, I would also ensure to update your BIOS but not to a BIOS version that is after they added support/fixes for Ryzen 5xxx series. As this might lower performance of the old CPUs such as yours. After a BIOS update, go into the BIOS, select Optimized Defaults, Apply via Save & Exit. Then re-enter the BIOS and enable the proper DOCP/XMP profile for DRAM so your RAM runs as it was designed to per its specs. Save & Exit to Apply. Done deal, shouldn't have to change much if anything else. Just ensure the Target OS Drive is the only boot device. Should you need to ever boot from another Drive, such as USB, there is a F# Key to press in order to get access to the One Time Boot Options Menu; from there you select USB; such as for installing an OS via USB Flash Drive.
I don’t mean the RAM trouble shoot light i mean the actual ram rgb lights don’t turn off even when the PC is shut down, also thank you for taking the time to type this.
There should be a setting in the ARMORY CRATE program to apply settings/the profile upon windows startup. Alternatively, there's options in the bios to manually change and set the fan curve.
Sounds like this is all on you and user error/ignorance instead of the motherboard being bad. I personally have the ROG Strix x570-i gaming (wifi) and I have no issues with the lights being off when shut off (they're easily disabled through the bios) and I don't have any issues with fan curves not sticking (I do it through the MB bios).
So it's impossible for it to be "wired backwards"
X570 (non-s) and especially ones from ASUS I do not care for at all. B550 boards are better then my X570 Impact by a good amount while costing way less. B550 Aorus Master or MSI Unify would be my suggestion, Unify-X is daily driver.
But really suspect your fan issue isn't caused by the BIOS, but by that bloatware Armory Crate.
Tried it once, when I built my PC. Saw that it ate 5% of CPU time, on a 10900K - so re-installed Win10 because it was impossible to remove completely - will never install that crap again.