Zainstaluj Steam
zaloguj się
|
język
简体中文 (chiński uproszczony)
繁體中文 (chiński tradycyjny)
日本語 (japoński)
한국어 (koreański)
ไทย (tajski)
български (bułgarski)
Čeština (czeski)
Dansk (duński)
Deutsch (niemiecki)
English (angielski)
Español – España (hiszpański)
Español – Latinoamérica (hiszpański latynoamerykański)
Ελληνικά (grecki)
Français (francuski)
Italiano (włoski)
Bahasa Indonesia (indonezyjski)
Magyar (węgierski)
Nederlands (niderlandzki)
Norsk (norweski)
Português (portugalski – Portugalia)
Português – Brasil (portugalski brazylijski)
Română (rumuński)
Русский (rosyjski)
Suomi (fiński)
Svenska (szwedzki)
Türkçe (turecki)
Tiếng Việt (wietnamski)
Українська (ukraiński)
Zgłoś problem z tłumaczeniem
Cmos reset is often thrown around very loosly simply because it is always the first port of call when trying to troubleshoot a system. All removing it does is reset your RTC and bios values back to stock settings that would be set when the manufacture ships the motherboard.
Many people don't actually know what it is doing and throw it around much like many noobs always through around change the "PSU".
Go on many pc diff pc forums and see ppl throw these claims around for problems not even related all the time.
Although i am saying this problem is not due to cmos as some have mentioned it is still a good idea to reset it.
What happens if you manually start the computer by bridging the power pins on the motherboard? (What I mean by this, is trying to start the computer without using the power button). If you don't know how to do this, there are videos online or you can switch the reset button with the on button, and try starting with the reset button instead. I had this issue on a case previously - sometimes the power button would work, sometimes it wouldn't. It turned out the power button had failed, so connecting the reset button to the power pins solved the issue for me.
Do you have a PC speaker/beeper connected? If so, when you manage to get it to power on - do you get any warning beeps?
Are you having any performance issues with the system when you manage to get it powered on? Less than expected fps in games etc?
Can change the boot order in the bios also. Maybe press delete during booting to get into bios? Could also be another key. A list of keys might appear on the bottom when booting up.
If your installing windows disconnect all drives except the one your installing windows on. Hopefully the non connected drive doesn't also have windows on it. Some files necessary to boot windows might get installed on the second drive and if it fails or is removed the operating system won't boot.
When I bought two more 8s, the same brand and model as the other 8s, the problem went away and never happened again.
So: is your RAM mismatched?
Remove RAM and try booting with one stick.
Then remove and try booting with the other stick.
Then try booting with both again.
If it isn't an issue with your RAM, it could well be an issue with your motherboard. Look at the capacitors and try to see if any of them have raised, dome shaped tops rather than being flat
Power and sleep settings/additional power settings/choose what the power buttons do and uncheck the box next to turn on fast startup.
This
In the past i had a similar power up issue where a bad stick/slot was the cause.