D.O.C.P
I have enabled D.O.C.P. mode in my bios except that when I boot on the system it doesn't boot and it goes to safety, it says that the system is unstable

R5 2600x
Asus Tuf B450 Plus Gaming
Rx580 Armor 8go
Corsair Lpx 16go 3200mhz 16cl
< >
1-6 van 6 reacties weergegeven
Which bios version do you have? Ram speed should be no problem on this board and cpu.
I need to update my bios and i have disk in the box of the motherboard and i don’t have disk reader
D.O.C.P or called XMP

May be due to mobo not supporting the timings of the RAM,
But your processor does not support up to 3200 mhz RAM,
Your CPU supports up to 2933MHz RAM
you need to create your own RAM "overclocking" profile if you want maximum performance
Laatst bewerkt door A&A; 26 jan 2021 om 1:23
Origineel geplaatst door ⚒A&A✠(✠Ghost✠Warrior✠):
D.O.C.P or called XMP

May be due to mobo not supporting the timings of the RAM,
But your processor does not support up to 3200 mhz RAM,
Your CPU supports up to 2933MHz RAM
you need to create your own RAM "overclocking" profile if you want maximum performance
thumbs up!
Tanks s4r8

if you don't have time to make the best mode for your ram then do it that way

2933MHz 15-17-17-35

I'm not good at overclocking the ram, I took it from the same ram model but with a lower clock speed
Laatst bewerkt door A&A; 26 jan 2021 om 1:40
docp is amds version of xmp
it looks at a dimm and reads its spd/xmp profile to set freq, voltage and timings

it does not overclock ram, it overclocks the imc on the cpu
amd/intel rate the imc at 2133-2666, but they are more than capable of reaching 4000+
< >
1-6 van 6 reacties weergegeven
Per pagina: 1530 50

Geplaatst op: 25 jan 2021 om 12:41
Aantal berichten: 6