Установить Steam
войти
|
язык
简体中文 (упрощенный китайский)
繁體中文 (традиционный китайский)
日本語 (японский)
한국어 (корейский)
ไทย (тайский)
Български (болгарский)
Čeština (чешский)
Dansk (датский)
Deutsch (немецкий)
English (английский)
Español - España (испанский)
Español - Latinoamérica (латиноам. испанский)
Ελληνικά (греческий)
Français (французский)
Italiano (итальянский)
Bahasa Indonesia (индонезийский)
Magyar (венгерский)
Nederlands (нидерландский)
Norsk (норвежский)
Polski (польский)
Português (португальский)
Português-Brasil (бразильский португальский)
Română (румынский)
Suomi (финский)
Svenska (шведский)
Türkçe (турецкий)
Tiếng Việt (вьетнамский)
Українська (украинский)
Сообщить о проблеме с переводом
Igorslab did a good test for FE model which has only 2 8pin. They pulled 700w (350w each 8pin) and cables got 280°C hot! Extrem dangerous and you do nearly the same with 300w over 1 8pin.
PSU cables are often labelled with their rated power.
I draw up 200w x 3 8pin which is 600w + 70w pcie. Thats 50w above rated 150w. If i touch my cables they dont even get warm which means its fine. 300w over a single cable might be way too much.
Now looking at my AX1600i's spec sheet something about the 3090 makes me uncomfortable.... And looking into a crystal ball, I am thinking with the increasing power demands of GPUs we are going to need a new power standard to cope...
Heh thats why you never see people running RTX A100 SXM models because they require a special power delivery backplane running at an eyewatering 400W per SXM module.
Btw my psu says 12v rail 100 amps 1200w. I draw 670w from my psu over 12v rail. How do i abuse my psu and ask for a blast?
Right ive set it up now running 2 6+2 Pin Connectors to the 2 8 Pins on the GPU. Gonna test and see how it goes.
Keep us informed if any issue's will pop up.
loaded up witcher 3 got to an intensive area where the issue happens i alt tabbed while the game was open in the background and quickly played a Youtube Video and i got a display driver crash along with a quick black screen and nvddmkm and display warning in my event log
A power supply must do several things. Yes it must be able to output the rated power, but also with low enough ripple to not cause malfunction of the powered equipment. A PSU must also be able to respond to sudden changes in load without dropouts; when your hardware boosts its clock speed this can result in a spike in power demand.
ill give that a go in an hour noticed theres a new driver out ill DDU and install that version.
so in other words my RM850x that i only got and installed last week is pretty much crap then?
one after the other.
Maybe play around and test some other display drivers.