No signal

[AdityaLightRex]

So yesterday I built my PC for the first time, but after building when I started it there's no display signal I was confused as hell I rechecked if I did something wrong with CPU but it was totally fine then today morning I saw there's no signal in none of the ports
USB
Display
Ethernet

The thing is the light on the motherboard is on and fans are spinning, is this a sign of Dead motherboard?
If not please help

[r.linder]

It sounds like the system isn't POSTing. What motherboard, CPU, and RAM did you buy? What power supply?

Make sure your monitor cable (HDMI, VGA, DVI, DP) is plugged into your dedicated graphics card if you have one, and not the motherboard.

[AdityaLightRex]

Diposting pertama kali oleh Escorve:

It sounds like the system isn't POSTing. What motherboard, CPU, and RAM did you buy? What power supply?

Make sure your monitor cable (HDMI, VGA, DVI, DP) is plugged into your dedicated graphics card if you have one, and not the motherboard.

I3 9100f
16gb ram
Antec power supply 550w
Gt 1030
I rechecked 5 8 times all the plugs are connected where they should and motherboard light is on , and fans are spinning still no signal in any of USB ports even tried gpu nothing is showing

Same thing happened with my previous motherboard no display...when I switched motherboard bought new ddr3 Mobo it started working
This current one I ordered from Amazon and a lot of reviews Saying they too got fault, that's why I am concerned

[☆ id/SweetRin ☆ [JP]]

Diposting pertama kali oleh AdityaLightRex:

Diposting pertama kali oleh Escorve:

It sounds like the system isn't POSTing. What motherboard, CPU, and RAM did you buy? What power supply?

Make sure your monitor cable (HDMI, VGA, DVI, DP) is plugged into your dedicated graphics card if you have one, and not the motherboard.

I3 9100f
16gb ram
Antec power supply 550w
Gt 1030
I rechecked 5 8 times all the plugs are connected where they should and motherboard light is on , and fans are spinning still no signal in any of USB ports even tried gpu nothing is showing

Same thing happened with my previous motherboard no display...when I switched motherboard bought new ddr3 Mobo it started working
This current one I ordered from Amazon and a lot of reviews Saying they too got fault, that's why I am concerned

Give me the full name and brand of the motherboard and RAM. There for i can check there compatibility of your motherboard and ram.

[AdityaLightRex]

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

Diposting pertama kali oleh AdityaLightRex:

I3 9100f
16gb ram
Antec power supply 550w
Gt 1030
I rechecked 5 8 times all the plugs are connected where they should and motherboard light is on , and fans are spinning still no signal in any of USB ports even tried gpu nothing is showing

Same thing happened with my previous motherboard no display...when I switched motherboard bought new ddr3 Mobo it started working
This current one I ordered from Amazon and a lot of reviews Saying they too got fault, that's why I am concerned

Give me the full name and brand of the motherboard and RAM. There for i can check there compatibility of your motherboard and ram.

Mobo -Msi H310M Pro- M2 plus
RAM - hyper X 2666mhz ddr4 ram 8x2

[r.linder]

Definitely sounds like it could be a bad motherboard...

Try it with one of each of the 2 RAM modules you bought, just to eliminate the possibility of faulty RAM causing this.

[☆ id/SweetRin ☆ [JP]]

Diposting pertama kali oleh AdityaLightRex:

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

Give me the full name and brand of the motherboard and RAM. There for i can check there compatibility of your motherboard and ram.

Mobo -Msi H310M Pro- M2 plus
RAM - hyper X 2666mhz ddr4 ram 8x2

Give me your ram model number please and thank you. once i have that i can pinpoint if its compadible or not. This can be found on the ram stick itself, the box, or the website you found it from(usually).

Edit: Or just give me a link to the site you bought it from and I can look for what model number it is for you.

[AdityaLightRex]

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

Diposting pertama kali oleh AdityaLightRex:

Mobo -Msi H310M Pro- M2 plus
RAM - hyper X 2666mhz ddr4 ram 8x2

Give me your ram model number please and thank you. once i have that i can pinpoint if its compadible or not. This can be found on the ram stick itself, the box, or the website you found it from(usually).

It was this ram

https://www.amazon.in/dp/B07WD5VKTS/ref=cm_sw_r_apa_i_EQXWFbR3CQES8?_encoding=UTF8&psc=1

But I don't get it if ram is faulty why won't I get any signal in keyboard and mouse nothing at all....
Display I can understand but keyboard mouse no signal? Ah

[☆ id/SweetRin ☆ [JP]]

Diposting pertama kali oleh AdityaLightRex:

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

Give me your ram model number please and thank you. once i have that i can pinpoint if its compadible or not. This can be found on the ram stick itself, the box, or the website you found it from(usually).

It was this ram

https://www.amazon.in/dp/B07WD5VKTS/ref=cm_sw_r_apa_i_EQXWFbR3CQES8?_encoding=UTF8&psc=1

But I don't get it if ram is faulty why won't I get any signal in keyboard and mouse nothing at all....
Display I can understand but keyboard mouse no signal? Ah

It don't show your ram is compatible with your motherboard.

HyperX HX426C13PB3/8 - 8GB (1 x 8GB) DDR4-2666MHz 13 1.35V ¥8,274
HyperX HX426C13PB3K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V ¥16,378
HyperX HX426C13PB3/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V -
HyperX HX426C16FB2K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V -
HyperX HX421C14FBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX424C12SB2K2/8 - 8GB (2 x 4GB) DDR4-2400MHz 12 1.35V -
HyperX HX421C13SBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SB/4 - 4GB (1 x 4GB) DDR4-2133MHz 13 1.20V -
HyperX HX424C15FB/4 - 4GB (1 x 4GB) DDR4-2400MHz 15 1.20V ¥3,206
HyperX HX421C14FB/4 - 4GB (1 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/8 - 8GB (1 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX426C16FB2/8 - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V -
HyperX HX426C16FB3A/16 - - 16GB (1 x 16GB) DDR4-2666MHz 16 1.20V ¥9,113
HyperX HX426C16FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2666MHz 16 1.20V ¥19,103
HyperX HX424C15FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2400MHz 15 1.20V ¥17,787
HyperX HX424C15FB3A/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V ¥9,141
HyperX HX426C16FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V ¥10,726
HyperX HX426C16FB3A/8 - - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V ¥5,316
HyperX HX424C15FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V ¥10,219
HyperX HX424C15FB3A/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V ¥5,312
HyperX HX424C15FR2K2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V -
HyperX HX426C16FR2K2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V -
HyperX HX424C15FB/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V ¥8,462
HyperX HX424C15FB2/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V -
HyperX HX421C14FBK2/32 - - 32GB (2 x 16GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/16 - - 16GB (1 x 16GB) DDR4-2133MHz 14 1.20V -

Website I used. https://pangoly.com/en/review/msi-h310m-pro-m2-plus/compatibility/ram#cc

Every motherboard does things slightly differently. but yes my computer as i got Incompatible ram in my computer myself. But i was able to get it working as i was able to get to bio's. But if you cant get to bio's you might also have a motherboard problem or it could just be your ram. So I don't fully know as im not 100% sure how MSI boards run compared to ASUS boards. Sense you cant even get a post screen to where you get offered to go to bio's tells me maybe bad board. but I don't normally point the board fault until multiple ram was tried to see if it works. But yes if you have RAM your board cannot read it in my experiance will turn on but the RGB wont turn on but it will just be a black screen, the keyboard and mouse lights off too.

[r.linder]

RMA the motherboard and return the RAM. Make sure you follow QVL when buying RAM or there's no guarantee it'll be problem-free.

[AdityaLightRex]

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

Diposting pertama kali oleh AdityaLightRex:

It was this ram

https://www.amazon.in/dp/B07WD5VKTS/ref=cm_sw_r_apa_i_EQXWFbR3CQES8?_encoding=UTF8&psc=1

But I don't get it if ram is faulty why won't I get any signal in keyboard and mouse nothing at all....
Display I can understand but keyboard mouse no signal? Ah

It don't show your ram is compatible with your motherboard.

HyperX HX426C16FR2K2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V -
HyperX HX426C16FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3A/16 - - 16GB (1 x 16GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3A/8 - - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB2K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB2/8 - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C13PB3K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V
HyperX HX426C13PB3/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V
HyperX HX426C13PB3/8 - 8GB (1 x 8GB) DDR4-2666MHz 13 1.35V $45.87
HyperX HX424C15FR2K2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3A/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3A/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB2/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V -
HyperX HX424C15FB/4 - 4GB (1 x 4GB) DDR4-2400MHz 15 1.20V
HyperX HX424C12SB2K2/8 - 8GB (2 x 4GB) DDR4-2400MHz 12 1.35V -
HyperX HX421C14FBK2/32 - - 32GB (2 x 16GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/16 - - 16GB (1 x 16GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/8 - 8GB (1 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/4 - 4GB (1 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C13SBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SB/4 - 4GB (1 x 4GB) DDR4-2133MHz 13 1.20V -

Website I used. https://pangoly.com/en/review/msi-h310m-pro-m2-plus/compatibility/ram#cc

Every motherboard does things slightly differently. but yes my computer as i got Incompatible ram in my computer myself. But i was able to get it working as i was able to get to bio's. But if you cant get to bio's you might also have a motherboard problem or it could just be your ram. So I don't fully know as im not 100% sure how MSI boards run compared to ASUS boards. Sense you cant even get a post screen to where you get offered to go to bio's tells me maybe bad board. but I don't normally point the board fault until multiple ram was tried to see if it works. But yes if you have RAM your board cannot read it in my experiance will turn on but the RGB wont turn on but it will just be a black screen, the keyboard and mouse lights off too.

Thank you for your effort means a lot.

[☆ id/SweetRin ☆ [JP]]

Diposting pertama kali oleh AdityaLightRex:

Diposting pertama kali oleh ☆　甘い凛　☆　JP:

It don't show your ram is compatible with your motherboard.

HyperX HX426C16FR2K2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V -
HyperX HX426C16FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3A/16 - - 16GB (1 x 16GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB3A/8 - - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB2K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C16FB2/8 - 8GB (1 x 8GB) DDR4-2666MHz 16 1.20V
HyperX HX426C13PB3K2/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V
HyperX HX426C13PB3/16 - 16GB (2 x 8GB) DDR4-2666MHz 13 1.35V
HyperX HX426C13PB3/8 - 8GB (1 x 8GB) DDR4-2666MHz 13 1.35V $45.87
HyperX HX424C15FR2K2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3AK2/32 - - 32GB (2 x 16GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3AK2/16 - - 16GB (2 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3A/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB3A/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB2/8 - - 8GB (1 x 8GB) DDR4-2400MHz 15 1.20V
HyperX HX424C15FB/16 - - 16GB (1 x 16GB) DDR4-2400MHz 15 1.20V -
HyperX HX424C15FB/4 - 4GB (1 x 4GB) DDR4-2400MHz 15 1.20V
HyperX HX424C12SB2K2/8 - 8GB (2 x 4GB) DDR4-2400MHz 12 1.35V -
HyperX HX421C14FBK2/32 - - 32GB (2 x 16GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/16 - - 16GB (1 x 16GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/8 - 8GB (1 x 8GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C14FB/4 - 4GB (1 x 4GB) DDR4-2133MHz 14 1.20V -
HyperX HX421C13SBK2/16 - 16GB (2 x 8GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SBK2/8 - 8GB (2 x 4GB) DDR4-2133MHz 13 1.20V -
HyperX HX421C13SB/4 - 4GB (1 x 4GB) DDR4-2133MHz 13 1.20V -

Website I used. https://pangoly.com/en/review/msi-h310m-pro-m2-plus/compatibility/ram#cc

Every motherboard does things slightly differently. but yes my computer as i got Incompatible ram in my computer myself. But i was able to get it working as i was able to get to bio's. But if you cant get to bio's you might also have a motherboard problem or it could just be your ram. So I don't fully know as im not 100% sure how MSI boards run compared to ASUS boards. Sense you cant even get a post screen to where you get offered to go to bio's tells me maybe bad board. but I don't normally point the board fault until multiple ram was tried to see if it works. But yes if you have RAM your board cannot read it in my experiance will turn on but the RGB wont turn on but it will just be a black screen, the keyboard and mouse lights off too.

Thank you for your effort means a lot.

You're most welcome.