Steam 설치
로그인
|
언어
简体中文(중국어 간체)
繁體中文(중국어 번체)
日本語(일본어)
ไทย(태국어)
Български(불가리아어)
Čeština(체코어)
Dansk(덴마크어)
Deutsch(독일어)
English(영어)
Español - España(스페인어 - 스페인)
Español - Latinoamérica(스페인어 - 중남미)
Ελληνικά(그리스어)
Français(프랑스어)
Italiano(이탈리아어)
Bahasa Indonesia(인도네시아어)
Magyar(헝가리어)
Nederlands(네덜란드어)
Norsk(노르웨이어)
Polski(폴란드어)
Português(포르투갈어 - 포르투갈)
Português - Brasil(포르투갈어 - 브라질)
Română(루마니아어)
Русский(러시아어)
Suomi(핀란드어)
Svenska(스웨덴어)
Türkçe(튀르키예어)
Tiếng Việt(베트남어)
Українська(우크라이나어)
번역 관련 문제 보고
1. Lowering voltage of the CPU (might needs to lower clock too to run stable)
2. Getting a better CPU cooler
3. Reapplying changing thermal compound between CPU and Cooler
4. Run the fans of the CPU cooler faster
5. Delidding and changing the TIM to a better material liek liquid metal
6. Getting a better airflow in the case through a new case or faster or better or more case fans
...
well enough solutions but your system specs would be helpfull to know what the best first attemp would be.
MB: ASUS M5 A97 LE R2.0
COOLER: Cosair H55
im getting around 30c on idle, and +70c under load. im not sure if that is too hot, but my games have been dropping frames for some reason, before they never did now they drop to like sub 30 fps pretty normally then shoot back up to 60.
So yeah it's overheating.
You need a better cooler. The one you have right now is a cheapo AIO.
alright, dont got the money right now, so is there some software i can get that makes my fan go faster?
Making a fan on a AIO run faster will not make the CPU run cooler.
Are you overclocking?
You might want to reaply thermal paste.
how do i set it up for high proformance?
rip
no, im not
alright, ill try that.
I used a Corsair H50 on my old Phenom II x4 940 that I OC'ed the crap out of (well, may not OC'ed the crap out of, but I cranked a lot of extra voltage through it) and she kept temps under 60C.
Stock voltage (going from memory) on the 940 was automatically set to 1.250V (I could adjust it down to 1.2125 and still operate without issues at stock speeds of 3.0GHz). To hit 3.6GHz I had to set the voltage to 1.475. If I really wanted that extra .1GHz and have her run at 3.71, I'd have to set to voltage to 1.5375. The H50 kept temps under 60C.
The H55 should be able to keep the 8350 cool, even if there was a small overclock. It could just be that the H55 is on it's way out. As suggested, reapply new thermal paste and if that doesn't fix it, then it woudl be time for a new heatsink.
How to you change the heatsink on an AIO?
Wow...no. You can believe what you want, but you're mistaken.
Max voltage on the MB for CPU was 1.55V (ASRock K10N780SLIx3-WiFi). When I had the CM 212+, I had to push 1.55V to hit 3.71 on the PII x4 940 I had. However, the temps ran around 63-65C. So I had to back it down to the 1.5125V and keep her at 3.6 (temps stayed around 60C).
The case I had was horrible with air flow, so the 212+ wasn't working as well as it should. I picked up a Corsair H50 from Best Buy one day because I saw it on sale for $39.99 (instead of the normal $60-70).
The AIO worked better in my case over the air cooler and I could run the same 3.6GHz, but only have to push 1.475V. To hit 3.71 I had to run the voltage at 1.5375 and the H50 kept the temps around 60C.
With the aio coolers pull the air from outside the case and have good exhaust going out of the case.
Ps, If you've got to get a new cooler just get a 212plus/evo or the better Cryorig H7.