knighttime 1 października 2018 o 20:47
should the psu fan face up or down?
im ready to install my new psu and i dont know if the fan is supposed to face up or down?
< >
Wyświetlanie 31-33 z 33 komentarzy
knighttime 2 października 2018 o 2:58 
in order for me to know do i have have to unplug everything from the mb first then pull out the psu? it seems impossible to pull out the psu cause it tugs on things and i cant reach my hand under in there to unplug stuff. more work oh well
Ostatnio edytowany przez: knighttime; 2 października 2018 o 3:00
tacoshy 2 października 2018 o 3:01 
As mentioned, the cables should have written on it which ports they belong.
Talby 2 października 2018 o 6:00 
Good summary of common mistakes regarding getting the build to power up correctly:

PERFORM THESE STEPS before posting about POST/boot/no video problems[www.tomshardware.com]

Any time I get a build having a boot / post problem I always remove everything off the board and stick with the bare-bones basics:

cpu+hsf / 1 stick ram / on-board IGP (or a known working low power PCIE GPU) / PSU (ATX 20+4 and CPU +12v ONLY) and the power-switch from the front panel header only.

Once you can get it working at this point, should be painless and any problems at this point are very easy to troubleshoot.

Początkowo opublikowane przez Suicidal Monkey:
...This results in 1-1.5 inches of my PSU fan lining up with a solid, none vented part of my case...
this should help![www.lowes.com]
Ostatnio edytowany przez: Talby; 2 października 2018 o 6:07
< >
Wyświetlanie 31-33 z 33 komentarzy
Na stronę: 1530 50

Data napisania: 1 października 2018 o 20:47
Posty: 33