I cannot boot from usb.

[Gork]

I have run media creation tool to my usb stick. Whenever i plug it into my second pc and try to select to boot from it, it isnt even an option. Any tips?
My motherboard = f2a55m-ds2
Bios version = f3

[raupi]

Have you checked your BIOS? USB is probably not enabled as a boot device.

[Gork]

Początkowo opublikowane przez raupi:

Have you checked your BIOS? USB is probably not enabled as a boot device.

I've checked it. It is enabled and so is legacy mode/uefi mode too.

[Omega]

Enable Legacy boot.

[Gork]

Początkowo opublikowane przez Omega:

Enable Legacy boot.

Already enabled.

[Omega]

Try a different USB port. One that is NOT USB 3.0.

[Gork]

Początkowo opublikowane przez Omega:

Try a different USB port. One that is NOT USB 3.0.

Will try that. Thanks.

[Bad 💀 Motha]

Yes, a Rear USB 2.0 port

Just set the USB drive as the only boot drive option.
After the OS install does its first reboot, re-enter the BIOS and set your OS SSD/HDD as the only boot drive.

[Gork]

Początkowo opublikowane przez Bad_Motha:

Yes, a Rear USB 2.0 port

Just set the USB drive as the only boot drive option.
After the OS install does its first reboot, re-enter the BIOS and set your OS SSD/HDD as the only boot drive.

That is the problem. I don't even have the option to set the usb drive as the only boot drive option. I have everything else, san disk, my hard drive etc.

[Omega]

What motherboard do you have?

You could try a different flash drive. Motherboards sometimes just do not like some flash drives for some reason.

[Gork]

Początkowo opublikowane przez Omega:

What motherboard do you have?

You could try a different flash drive. Motherboards sometimes just do not like some flash drives for some reason.

Motherboard is gigabyte f2a55m-ds2

I seemed to access the usb stick by selecting sandisk > hard drive. I am currently proceeding via the windows 10 installation after wiping my main hard drive on that pc. Hopefully i dont encounter any more issues.