Ryzen 5 3600 high temps with Cooler Master hyper 212

[Happy Larry]

Hey,
I recently upgraded my cpu ( ryzen 5 1600x) to ryzen 3600 .
I got a solid idle temp with 34c , ingame 50c at top with the old 1600x but not with the new one...
3600 is running constantly with 1.45 core voltage at 4.1 core speed.
Idle temperature between 45c and 60c , ingame runs with 50c-80c.( sometimes it hits 80c but goes down asap.)
I ran AIDA64 program to stress test it for an hour and the temp spikes were even there... it hit 80c like every 10 min , then immidiately went back to 74c which was like the base top temp in that program.
My thermal paste is mx-4 , I never had any problem with it before.
My new pc case is the cooler master h500 with 3 stock fans. Cpu cooler is the cooler master hyper 212.
Whats up with this cpu ? Is it normal that it runs hot like this with a third party cooler? Do I need to check anything in the bios ?
Cpu: ryzen 5 3600
Mobo: b450m ds3h-cf ( newest bios)
Graphics card : rtx 2070 ( newest driver)
Ram : 2x8gb 2666mhz
Psu : SilverStone Essential Gold ET750-HG 750W
Thanks in advance.

[Happy Larry]

Автор сообщения: ☥ - CJ -

+1 for spread method with a small dot in the middle

If the clocks/voltage are "constant" as you say, at idle AND load that would explain the high idle temps

Let it down clock and the idle temps should drop, possibly load temps as well.

Did you default the BIOS after you updated the BIOS?
If not, i would try that as well

Another thing
That case gets plenty of intake but only 1 exhaust fan, adding a top exhaust may help also.

I did reset the bios , yes. Yea Im considering at least one more fan , top one.

[Happy Larry]

Okey so I reset the cpu cooler ,remade the thermal paste ( now I used cross type instead of one little dot to the middle) It runs like 7c lower than before! Thats something...but it still keeps spike up to 55c. I think I will live with these temps from here.
Thanks for everyone all the help !

[r.linder]

Автор сообщения: Sad Larry

Okey so I reset the cpu cooler ,remade the thermal paste ( now I used cross type instead of one little dot to the middle) It runs like 7c lower than before! Thats something...but it still keeps spike up to 55c. I think I will live with these temps from here.
Thanks for everyone all the help !

That's somewhat normal now. My 3900X with a 360mm AIO and Kryonaut paste can spike into the 50s at "idle" state sometimes.

[xSOSxHawkens]

Yeh. Thats a bit better. If you have a spare 120mm case fan add it on the back using the extra fan mount bracket for a push/pull config. Will work a bit better ;)

[emoticorpse]

Автор сообщения: Sad Larry

Автор сообщения: emoticorpse

Change the fan from the stock one to a different one.

I mentioned Im using third party cooler :D

Nah, i meant the actual fan on the thing. Instead of the one that ships with the hyper 212.

[Happy Larry]

Автор сообщения: emoticorpse

Автор сообщения: Sad Larry

I mentioned Im using third party cooler :D

Nah, i meant the actual fan on the thing. Instead of the one that ships with the hyper 212.

Ooo, I see , sorry :) I will look for one , its probably cheap to get it.

[Happy Larry]

Автор сообщения: xSOSxHawkens

Yeh. Thats a bit better. If you have a spare 120mm case fan add it on the back using the extra fan mount bracket for a push/pull config. Will work a bit better ;)

Thanks for the help :)

[r.linder]

Автор сообщения: Sad Larry

Автор сообщения: emoticorpse

Nah, i meant the actual fan on the thing. Instead of the one that ships with the hyper 212.

Ooo, I see , sorry :) I will look for one , its probably cheap to get it.

Cooler Master's fans are cheap, that's kind of the problem. They aren't good.

Corsair and Noctua's fans are generally quite a bit better, though be quiet! make really good ones too that perform slightly better but run quieter. I recommend getting two from be quiet!

[Happy Larry]

Автор сообщения: Escorve

Автор сообщения: Sad Larry

Ooo, I see , sorry :) I will look for one , its probably cheap to get it.

Cooler Master's fans are cheap, that's kind of the problem. They aren't good.

Corsair and Noctua's fans are generally quite a bit better, though be quiet! make really good ones too that perform slightly better but run quieter. I recommend getting two from be quiet!

Are they really makes that big difference? Aftermarket fans vs stock ones.

[_I_]

any single fan is better than p+p mismatched fans

sp fans are best on coolers/rads, airflow fans for vents

[r.linder]

Автор сообщения: Sad Larry

Автор сообщения: Escorve

Cooler Master's fans are cheap, that's kind of the problem. They aren't good.

Corsair and Noctua's fans are generally quite a bit better, though be quiet! make really good ones too that perform slightly better but run quieter. I recommend getting two from be quiet!

Are they really makes that big difference? Aftermarket fans vs stock ones.

Depends on the fan you choose. Cooler Master's fans really aren't great. Corsair and Noctua's fans are quieter and perform a tiny bit better, and that can make a noticeable difference.

[_I_]

the evo/black fan is better than the vanilla or + fans
evo has better heatpipe design also (no gaps between them in the base)
either should be silent at 0-1500 rpm, evo/black are quieter are higher rpms

[Bad 💀 Motha]

The EVO fan is junk. Replace it.

Or buy the EVO V2.

Again the heatsink is all fine, just junk fan.

[[☥] - CJ -]

wasnt aware there was a V2

[Bad 💀 Motha]

The EVO V2 has an offset position regarding the design of the heatpipes. And an extremely better mount metbod. Making tall ram a real non-issue for the 212 now compared to older Hyper212 Plus or EVO

https://youtu.be/twPYtIRy0F0