Steam installieren
Anmelden
|
Sprache
简体中文 (Vereinfachtes Chinesisch)
繁體中文 (Traditionelles Chinesisch)
日本語 (Japanisch)
한국어 (Koreanisch)
ไทย (Thai)
Български (Bulgarisch)
Čeština (Tschechisch)
Dansk (Dänisch)
English (Englisch)
Español – España (Spanisch – Spanien)
Español – Latinoamérica (Lateinamerikanisches Spanisch)
Ελληνικά (Griechisch)
Français (Französisch)
Italiano (Italienisch)
Bahasa Indonesia (Indonesisch)
Magyar (Ungarisch)
Nederlands (Niederländisch)
Norsk (Norwegisch)
Polski (Polnisch)
Português – Portugal (Portugiesisch – Portugal)
Português – Brasil (Portugiesisch – Brasilien)
Română (Rumänisch)
Русский (Russisch)
Suomi (Finnisch)
Svenska (Schwedisch)
Türkçe (Türkisch)
Tiếng Việt (Vietnamesisch)
Українська (Ukrainisch)
Ein Übersetzungsproblem melden
all sectors of a ssd have the same response time no matter what the previous sector read was
Maybe changing say 1TB QLC drive into a 256GB SLC caching drive.
If an SSD drive has an SLC cache or a DRAM buffer, those storage areas are not accessible directly and cannot be utilized as a means of 'short stoking'.
In the event you had a drive like one of those western digitals or seagates that marged an SSD drive with a hard drive and ended up with two volumes--the SSD and the HDD, you'd just have two volumes and you could short stoke the HDD but probably would be better off just getting something better since often those drives are 5400rpm due to expecting to use the SSD as a cache.
You might want to look at a product called Primocache for disk caching if you wanted to benefit using a faster storage type (say, DRAM or an SSD of *any* size, or an optane drive, in front of an HDD or other slower SSD).
I personally use it on my gaming PC as well as workstations and a server; it works great. I didn't even bother trying to short stoke the raids I had because with the SSD caching I was able to make use of the full volume space.
WIth the advent of inexpensive tiered storage mechanisms--be it via clever software or hardware integration, the days of short stoking a RAID or slower disk drive for performance is drawing to a close.
You may wish to leave aside unused space on a solid state drive to leave that capacity available for the error recovery/garbage collection purposes of solid state performance maintenance done via the drive's firmware (this can also increase the longevity of the drive), but generally speaking it doesn't speed up performance directly; it would help prevent performance from degrading over time, though.
This was more just a random thought question than anything.