Instalar Steam
iniciar sesión
|
idioma
简体中文 (chino simplificado)
繁體中文 (chino tradicional)
日本語 (japonés)
한국어 (coreano)
ไทย (tailandés)
Български (búlgaro)
Čeština (checo)
Dansk (danés)
Deutsch (alemán)
English (inglés)
Español de Hispanoamérica
Ελληνικά (griego)
Français (francés)
Italiano
Bahasa Indonesia (indonesio)
Magyar (húngaro)
Nederlands (holandés)
Norsk (noruego)
Polski (polaco)
Português (Portugués de Portugal)
Português-Brasil (portugués de Brasil)
Română (rumano)
Русский (ruso)
Suomi (finés)
Svenska (sueco)
Türkçe (turco)
Tiếng Việt (vietnamita)
Українська (ucraniano)
Comunicar un error de traducción
What other games will you be playing?
As for the GPU, get some compressed air and just blow all the dust out of the card, if that doesn't do the job, you may want to look at replacing thermal paste.
There is nothing much you can do to upgrade it because even a 3rd gen core i5 and basic H61 motherboard performs better.
atleast you had it in a 990fx board to let it run as good as it can
its not throttling the gpu, its just not able to keep up with it
*unless gpu temps are going over 90c, which is very unlikely
keep it as a htpc/streaming or sell it as is
and save up $600+ for a new build
(each cores activity or a maxed core is meaningless)
but you can watch overall cpu usage if you know how many threads the game can use
(fx6 has 6 threads, 2 thread app = 33% max to that app)
or just watch gpu usage and temps while playing
gpu not at 100% and temps below 90c = cpu bottleneck
(or vsync is enabled if at refresh rate in fps)
fx also has a low max temp, 62-72c depending on the rev
http://www.cpuid.com/softwares/cpu-z.html
cpuz -> validate button -> submit button
it will open a browser, copy the url (address) and paste it here
that sounds like throttling
unstable oc, poor cooling ect..
You can reuse your storage drives, use the SSD as the boot drive (OS drive)
FX4 and 6 aren't worth keeping, especially the original ones.
never do that on unlocked cpus
go to bios and reset it to defaults
then set ram to its rated speeds/timings or xmp if the board supports it
if you want to overclock, just raise the cpu multi, wont change the ram freq, ht and other things