Warfare 2016 年 11 月 20 日 下午 2:53
Is there anyone else with Sound Blaster Z audiocard?
I've bought Sound Blaster Z audiocard and connected it using optical cable to 5.1 system. It sounds gorgeous, however I'm expiriencing slight delay between sound and picture. It's not so noticable in movies, but pretty noticable in games, specially during cut scenes with lipsync.
When I'm system with common 3-jacks cable, everything works just fine.
Does anyone else uses this audiocard with optical output? Do you expirience this problem too?
< >
目前顯示第 1-14 則留言,共 14
Revelene 2016 年 11 月 20 日 下午 3:31 
Has it done this from the beginning, on default settings?

Probably just need a clean installation of the drivers. I'd also recommend removing the sound drivers for the onboard as well. Get drivers from Creative's support page, not through Windows.
Arvaos 2016 年 11 月 20 日 下午 3:44 
I recommend setting the audio quality to 44-48KhZ audio output, the delay could be caused by down conversion.
Warfare 2016 年 11 月 21 日 上午 9:05 
Has it done this from the beginning, on default settings?

Probably just need a clean installation of the drivers. I'd also recommend removing the sound drivers for the onboard as well. Get drivers from Creative's support page, not through Windows.
Yes, this was from beginning, on the system installed from scratch. Be default it has some adjsutment settings on, like Crystalizer and stuff. Unchecking them decrease the latency about 200-300 ms, but it's still not good enough.

Drivers installed manually, the latest version available. However I haven't tried to remove the onboard drivers. I'll give it a shot, thank you.


引用自 Synth3D
I recommend setting the audio quality to 44-48KhZ audio output, the delay could be caused by down conversion.
Well, it's 48 already. I think that converting sound to DTS may cause the latency, but I'm not sure if it's possible to send sound through optical cable without converting.
darkkterror 2016 年 11 月 21 日 上午 9:45 
It is possible to send sound over optical without converting however you will only get 2 channel audio. For 5.1 to work over optical it has to be converted to a compressed format like DTS or Dolby.
Warfare 2016 年 11 月 22 日 上午 2:11 
So it's seems like DTS is the only option. And I'm alone here who suffers a slight lag because of it?
Midnight Fawn 2016 年 11 月 22 日 上午 4:44 
Are you using a TV by any chance..?
Bad 💀 Motha 2016 年 11 月 22 日 上午 6:24 
Do you have other audio devices active on the system?
Disable them completely.

Have you tried a different PCIE slot?
Please do that.

Have you tried different Audio Driver?

Also put the card setting to Game Mode; setup the DTS 5.1
Once applied, reboot.
最後修改者:Bad 💀 Motha; 2016 年 11 月 22 日 上午 6:24
Warfare 2016 年 11 月 23 日 上午 8:39 
引用自 Scottish Tablet
Are you using a TV by any chance..?
I am. But this is not the video latency, because it's same with the monitor.

引用自 Bad-Motha
Do you have other audio devices active on the system?
Disable them completely.

Have you tried a different PCIE slot?
Please do that.

Have you tried different Audio Driver?

Also put the card setting to Game Mode; setup the DTS 5.1
Once applied, reboot.
About different Audio driver - I'm not sure where to find one, except the official one I'm using.
Also I couldn't find anything like Game Mode for my audiocard.

I've just tried disabling Nvidia virtual audio device and onboard audio. Seems to be a bit better, though need a bit more testing.
Revelene 2016 年 11 月 23 日 上午 8:41 
引用自 Warfare
引用自 Scottish Tablet
Are you using a TV by any chance..?
I am. But this is not the video latency, because it's same with the monitor.

I'd say he asked, as many televisions have internal sound processing that can add latency. Probably check if you can disable any fancy audio settings.
最後修改者:Revelene; 2016 年 11 月 23 日 上午 8:41
Bad 💀 Motha 2016 年 11 月 23 日 上午 9:44 
引用自 Warfare
I am. But this is not the video latency, because it's same with the monitor.

I'd say he asked, as many televisions have internal sound processing that can add latency. Probably check if you can disable any fancy audio settings.

Well if you are not feeding any Digital Audio Source to the Display, then it's never processing any audio.


引用自 Warfare
About different Audio driver - I'm not sure where to find one, except the official one I'm using.
Also I couldn't find anything like Game Mode for my audiocard.

I've just tried disabling Nvidia virtual audio device and onboard audio. Seems to be a bit better, though need a bit more testing.

Whenever you use a dedicated Sound Card, it is best to first go uninstall the Drivers for your Motherboard's Onboard Audio (such as Realtek); once those drivers/software are uninstalled, reboot, enter the BIOS and Disable Onboard Audio of any kind in there; that ensure such devices never present themselves to your OS.

For GPUs such as AMD or NVIDIA, those will offer audio as well (for when/if you want Audio through HDMI or DisplayPort; however, the GPUs audio codec handles that and the features are very limited when used); after installing any GPU Driver Suite and you've rebooted and ready to use the system; go to Device Manager > look under Sound/Audio and right click GPU related audio devices and Disable them.

If you used any Drivers/Software for Creative sound card supplied via Disc, uninstall all of those.

Once complete (multiple reboots might be needed) then go here for the latest Drivers/Software for that series:
http://support.creative.com/downloads/welcome.aspx?nLanguageLocale=1033&nDriverType=0#type_0

Which covers:
Sound Blaster Z (SB1500, SB1502)
Sound Blaster Zx (SB1506)

Download:
Creative Sound Blaster Z-Series Software
Filesize : 157.25 MB
Release date : 24 Jun 16

and install that. Reboot after completed, then load up the Creative Volume Control and set everything up how you want.

Here is an example of where to set it to "Gaming"
http://cache.megatechnews.com/wp-content/uploads/2013/08/evozx-13-500x357.jpg
最後修改者:Bad 💀 Motha; 2016 年 11 月 23 日 上午 10:03
Otter Boi 2016 年 11 月 23 日 上午 10:32 
I am using the Sound Blaster Z sound card. I bought the sound card for scout mode and more HD audio and using an older drivers version of the sound card because I experience issues with audio with the latest drivers installed like audio sounds like NES 8-bit sometimes when I paly GMod and voice chatting on Skype.
Revelene 2016 年 11 月 23 日 下午 1:15 
引用自 Bad-Motha

I'd say he asked, as many televisions have internal sound processing that can add latency. Probably check if you can disable any fancy audio settings.

Well if you are not feeding any Digital Audio Source to the Display, then it's never processing any audio.

Well, water is wet, too.

He never specified what he was sending the audio to.
Warfare 2016 年 12 月 8 日 上午 9:59 
Hello, sorry for been out of computer forawhile. Anyway:

引用自 birthdaybrian
I am using the Sound Blaster Z sound card. I bought the sound card for scout mode and more HD audio and using an older drivers version of the sound card because I experience issues with audio with the latest drivers installed like audio sounds like NES 8-bit sometimes when I paly GMod and voice chatting on Skype.
Thanks, good idea, I'll try to switch to older drivers.


引用自 Warfare
I am. But this is not the video latency, because it's same with the monitor.
I'd say he asked, as many televisions have internal sound processing that can add latency. Probably check if you can disable any fancy audio settings.
Thanks, but as I've mentioned, it connected directly to 5.1 system Logitech Z906.


引用自 Bad-Motha
I've uninstalled onboard and Nvidia audio drivers. It became better, but unfortunately not as much as on 3 jacks.
I have the latest drivers from the creative websites - the first thing I've checked.
I'm not using any profiles, because all of them enables SBX Pro studio features, which leads to small latency increase.
Revelene 2016 年 12 月 8 日 下午 1:19 
引用自 Warfare
I'd say he asked, as many televisions have internal sound processing that can add latency. Probably check if you can disable any fancy audio settings.
Thanks, but as I've mentioned, it connected directly to 5.1 system Logitech Z906.

I double checked and this is the first mention of what you were connecting to.
< >
目前顯示第 1-14 則留言,共 14
每頁顯示: 1530 50

張貼日期: 2016 年 11 月 20 日 下午 2:53
回覆: 14