安装 Steam
登录
|
语言
繁體中文(繁体中文)
日本語(日语)
한국어(韩语)
ไทย(泰语)
български(保加利亚语)
Čeština(捷克语)
Dansk(丹麦语)
Deutsch(德语)
English(英语)
Español-España(西班牙语 - 西班牙)
Español - Latinoamérica(西班牙语 - 拉丁美洲)
Ελληνικά(希腊语)
Français(法语)
Italiano(意大利语)
Bahasa Indonesia(印度尼西亚语)
Magyar(匈牙利语)
Nederlands(荷兰语)
Norsk(挪威语)
Polski(波兰语)
Português(葡萄牙语 - 葡萄牙)
Português-Brasil(葡萄牙语 - 巴西)
Română(罗马尼亚语)
Русский(俄语)
Suomi(芬兰语)
Svenska(瑞典语)
Türkçe(土耳其语)
Tiếng Việt(越南语)
Українська(乌克兰语)
报告翻译问题
One other thing it could be if they were all separate wires and you were using the printed manual is the manual could have listed what wire goes where wrong. Not the first time I'd see that happen or the second LOL. Go online to the case manufacturers site and see if there is a online manual to look at and see if that matches up with the printed manual you have.
Other then that shut her down, unplug the power supply and then open the side panel on the case and double check your front panel audio wiring and make sure everything is plugged in where it needs to be. That is if the wires are all separate, if it is a plug pretty much impossible to plug that in wrong.
In that case it may well be that a setting in the realtek audio manager may be wrong for front panel detection. I remember something years ago where there was a setting in there that caused the front panel to not work. Ok did some searching and this may be it http://en.community.dell.com/cfs-file/__key/communityserver-discussions-components-files/3517/REaltek_5F00_HD_5F00_Audio_5F00_Manager.jpg
I can't remember if that needs to be checked or unchecked though, if your wiring is correct then try both ways. I do remember years ago when I had realtek audio that I had to do something with that to get my front panel audio to work.