ติดตั้ง Steam
เข้าสู่ระบบ
|
ภาษา
简体中文 (จีนตัวย่อ)
繁體中文 (จีนตัวเต็ม)
日本語 (ญี่ปุ่น)
한국어 (เกาหลี)
български (บัลแกเรีย)
Čeština (เช็ก)
Dansk (เดนมาร์ก)
Deutsch (เยอรมัน)
English (อังกฤษ)
Español - España (สเปน)
Español - Latinoamérica (สเปน - ลาตินอเมริกา)
Ελληνικά (กรีก)
Français (ฝรั่งเศส)
Italiano (อิตาลี)
Bahasa Indonesia (อินโดนีเซีย)
Magyar (ฮังการี)
Nederlands (ดัตช์)
Norsk (นอร์เวย์)
Polski (โปแลนด์)
Português (โปรตุเกส - โปรตุเกส)
Português - Brasil (โปรตุเกส - บราซิล)
Română (โรมาเนีย)
Русский (รัสเซีย)
Suomi (ฟินแลนด์)
Svenska (สวีเดน)
Türkçe (ตุรกี)
Tiếng Việt (เวียดนาม)
Українська (ยูเครน)
รายงานปัญหาเกี่ยวกับการแปลภาษา
Thats on Gigabyte z270x gaming k5 motherboard. Auto was 1.29...cam't believe Gigabyte made default even higher. As default vcore is even higher on your board the setting for my vcore would be -0.150
Keep in mind silicon lottery. Yours may do better or worse than mine. Personally I'd start at -0.100 first then try in 0.010 increments. If crashes occur dial it back 0.005 and try again.
Edit: the voltage wont damage the cpu, it set high enough that every cpu will run, even if they are the worse luck of the silicon lottery draw. Provided ypu dont lower it too low to affect stability there really isnt a bad side to lowering it. The bonus to lowering it will be lower temps from the reduced voltage and that in turn will mean less noise from fans as they can run slower.
Thanks
What cooler though? 7700K is a very hot chip even at stock without undervolting.
they have good guides, often cpu batch info for similar cpus from similar wafers
every cpu is different, each will have different speeds/temp/voltage wall