enabling ram xpm

[RyanM]

hi, i want to enable ram xmp in my bios but im not sure if my ram supports it or where to find it, i use asus uefi bios.

[Bad 💀 Motha]

Read the manual, very simple

[RyanM]

Opprinnelig skrevet av Bad 💀 Motha:

Read the manual, very simple

I got my pc quite a while ago, i dont have manuals anymore

[Bad 💀 Motha]

Then look up the Asus motherboard model on Google go to the official page for it and get the pdf manual

[Overseer]

Use CPU-Z and check under SPD the Slots. It will tell you supported speeds in the Timings Table and give you the Part Number of each individual DIMM, which you can lookup online.

[Bad 💀 Motha]

Don't even need to look up the ram, CPUZ should tell you the xmp profile in the list there where it shows the frequency, timing, voltage, etc

[TehSpoopyKitteh]

Opprinnelig skrevet av Overseer:

Use CPU-Z and check under SPD the Slots. It will tell you supported speeds in the Timings Table and give you the Part Number of each individual DIMM, which you can lookup online.

That only works if it is Bufferred ECC type RAM. If it is unbuffered non-ecc, it’s going to read out as the minimum DDR4-speed the motherboard can use in spite of the rating on the RAM.

@OP, you’ll probably have to check the bios’s advanced settings and set the timings manually if XMP is unavailable to use.

[Bad 💀 Motha]

Opprinnelig skrevet av Teh Spoopy Kitteh:

Opprinnelig skrevet av Overseer:

Use CPU-Z and check under SPD the Slots. It will tell you supported speeds in the Timings Table and give you the Part Number of each individual DIMM, which you can lookup online.

That only works if it is Bufferred ECC type RAM. If it is unbuffered non-ecc, it’s going to read out as the minimum DDR4-speed the motherboard can use.

@OP, you’ll probably have to check the bios’s advanced settings and set the timings manually if XMP is unavailable to use.

Hmm no, it should show 4 listing of commonly supported specs that the installed ram supports

[Omega]

If your RAM doesn't have a XMP profile you can't enable XMP in BIOS anyway.

If your motherboard doesn't support memory "overclocking" you won't have the XMP option either.


Specs would be helpfull. Use CPU-z validation and share the URL.

Open up the BIOS check under the overclocking tab, it takes 1 minute.
No overclocking tab? = No XMP
No XMP profiles to choose from/XMP greyed out? = No XMP

[Bad 💀 Motha]

Best bet is list your specs...
Cpu
Motherboard
Ram

Models of each

[Overseer]

Opprinnelig skrevet av Teh Spoopy Kitteh:

That only works if it is Bufferred ECC type RAM. If it is unbuffered non-ecc, it’s going to read out as the minimum DDR4-speed the motherboard can use in spite of the rating on the RAM.

SPD has nothing to do with ECC. SPD only does not work when the DIMM went so cheap to not have an EEPROM installed that holds the information.

[RyanM]

Zoostorm
Product Dimensions 43 x 18 x 37 cm
Series Quest 7240-5200
Color Black
Form Factor Desktop PC
Processor Brand AMD A8 7650k
Processor Speed 3.3 GHz
Processor Count 4
RAM Size 8 GB
Computer Memory Type DDR3 SDRAM
Hard Drive Size 1000 GB
Hard Disk Technology Hybrid (HDD/SDD)
Hard Drive Interface Serial ATA
Graphics Chipset Brand AMD
Graphics Card Description Radeon R7 APU & a gtx 1050ti
Number of USB 2.0 Ports 4
Number of USB 3.0 Ports 2
Number of HDMI Ports 1
Optical Drive Type DVD-RW
Hardware Platform Windows
Operating System Windows 10 Home

Im planning to buy new sticks of ram today if it isnt compatible

[tacoshy]

What DDR3? What motherboard?

However. AMD doesn't use XMP it uses AMP. ASUS motherboards have a translator to translate XMP to AMP which is called DOCP.

PS: why you need XMP? It is wasted for DDR3 which is a dead platform espacially a weak APU.

[_I_]

he has a fm2 apu and board

odds are it will not support xmp/spd profiles
you will need to manually put in the ram speed/timings/voltage in bios

first look up the specs in cpuz spd tab
look at the fastest profile, write down the values, speed(freq x2), cas lat(cl),... voltage
and enter them in bios

[RyanM]

Opprinnelig skrevet av tacoshy:

What DDR3? What motherboard?

However. AMD doesn't use XMP it uses AMP. ASUS motherboards have a translator to translate XMP to AMP which is called DOCP.

PS: why you need XMP? It is wasted for DDR3 which is a dead platform espacially a weak APU.

its for an fps boost on fortnite. Apparently without (XMP/AMP) enabled you dont get the full performance of your system

[_I_]

with a dedicated gpu, its still the apus performance holding it back not ram speed/timings