My headset does not work (logitech artemis spectrum g933)

[Chicca]

I try to turn it on but it does not turn on. so I try to charge it, and then I try to turn it on, but it still does not work. I tried to turn it on while the charging cable was plugged in. I've tried multiple cables and usb ports. I know its not in sleep mode because the red light on the mic also does not work. I have tried hard reseting it and just letting it charge for a few hours.

I think what happend was that it started blinking red. Then i just let it run out of power (to kinda restart it) then charged it and turned it on, then it stopped working.

Help. What do/can I do?

[[☥] - CJ -]

Did you just leave it on the charger for a half hour or so and then see if it works?

If so and it still doesnt turn on then the battery might be dead
When a rechargeable battery drops to a certain voltage its dead and not recoverable, they can only be charged a limited amount of times before they should be replaced..

If you are able to change the batteries you can see if thats what happened.
As it appears the battery can be removed/replaced, if easily done remove the battery and see if the headset will then work with the USB

EDIT:
It does not use normal rechargeable batteries it uses a lithium https://www.amazon.com/Original-Logitech-Lithium-ion-Battery-Spectrum/dp/B01M2XCUWG

[Chicca]

thx, but it stil does not work with the battery unplugged (while the charging cable is pluged in)

[☭]

1

[[☥] - CJ -]

Have you tried other USB ports/adapters to make sure it isnt an issue with the power source?
Depending on how long youve had it for you might want to contact the manufacturer

[Chicca]

i've tried multiple usb cables and ports that work with other stuff, but not my headset.

When I try to charge the headset it blinks blue (just like its supposed to), but when I try to turn it on nothing happens.

[Chicca]

I charged it for 4 hours, and when i turned it on this time same deal, except for a tiny vibration. (I think)

[[☥] - CJ -]

If you are able to get a USB Tester that could be useful
But as i mentioned before, the battery is likely dead, and i dont know if that set will work normally without a battery installed so unno.

If you have a Multi meter test the voltage of the battery
If its in the area of 3V+ its fine, 2V and under its dead.