How to change to dvi on ASUS vg248qe

[Nerdy Larry]

I just bought this brand new monitor and it said i had to switch to DVI to get 144hz from hdmi so i switched the cables and it says dvi no signal so rn im stuck on hdmi 60hz. Please help!!!

[Raoul]

Maybe try displayport instead and have you checked monitor settings for changing input to DVI right?

[[☥] - CJ -]

I would also use DP if the GPU supports it, easier to manage, the cables arent expensive but dont get a crappy one.

When you changed to the DVI did you do this while the PC was on? If so have you tried changing it to DVI while the PC was off? Could also be a sketchy DVI cable. And be sure you are using the DVI-D port on the GPU and that its a DVI-D cable.

[Nerdy Larry]

Początkowo opublikowane przez Prince Habeeboo:

Maybe try displayport instead and have you checked monitor settings for changing input to DVI right?

Yeah i have :D

[Nerdy Larry]

Początkowo opublikowane przez Prince Habeeboo:

Maybe try displayport instead and have you checked monitor settings for changing input to DVI right?

Do i have to have the HDMI cable in as well cuz when i change from HDMI to dvi i need the HDMI right?

[Komrade]

Początkowo opublikowane przez Nerdy Larry:

Początkowo opublikowane przez Prince Habeeboo:

Maybe try displayport instead and have you checked monitor settings for changing input to DVI right?

Do i have to have the HDMI cable in as well cuz when i change from HDMI to dvi i need the HDMI right?

You don't, you use the DVI-D cable and select DVI-D as the input source in the monitor settings, only plug the DVI cable in.

[[☥] - CJ -]

Unless you are using 2 monitors only 1 needs to be connected, otherwise you'll have to go into the NVIDIA/AMD settings and change to that screen which could be why you arent getting signal if you are testing 2 cables at the same time

[Nerdy Larry]

Początkowo opublikowane przez notkennyS:

Początkowo opublikowane przez Nerdy Larry:

Do i have to have the HDMI cable in as well cuz when i change from HDMI to dvi i need the HDMI right?

You don't, you use the DVI-D cable and select DVI-D as the input source in the monitor settings, only plug the DVI cable in.

But I can’t cuz it says hdmi no signal (sorry if I sound retarded :D) before I use it

[Komrade]

Początkowo opublikowane przez Nerdy Larry:

Początkowo opublikowane przez notkennyS:

You don't, you use the DVI-D cable and select DVI-D as the input source in the monitor settings, only plug the DVI cable in.

But I can’t cuz it says hdmi no signal (sorry if I sound retarded :D) before I use it

Monitor settings are accessed by buttons physically on the monitor, you don't need anything connected.

[hawkeye]

With DVI you need a 3.5mm audio cable connected from your mobo audio output to the audio-in connector on the monitor. That's why there is a sound cable in the box.

DP probably works the same way from reading the manual. Just because DVI or DP can carry sound doesn't mean that the monitor works that way.

Only one cable with work at a time, so if you want to use DVI select it using the buttons on the monitor or remove the HDMI cable for auto-detect.

You might want to turn on loudness in the Windows sound properties as the speakers in these monitors can be fairly soft in noisy environments.

[_I_]

99% of monitor and tv speakers are crap
use a receiver or pc speakers instead

[Bad 💀 Motha]

Plug in hdmi and dvi at the same time to the gpu card. Go in Windows and set to Duplicate with WINKEY+P

Then unhook the hdmi.

Problem solved.

Audio just use Speakers or Headset.
Monitor speakers are like 2 watts, total crap

[Nerdy Larry]

Początkowo opublikowane przez notkennyS:

Początkowo opublikowane przez Nerdy Larry:

But I can’t cuz it says hdmi no signal (sorry if I sound retarded :D) before I use it

Monitor settings are accessed by buttons physically on the monitor, you don't need anything connected.

wym cuz when i disconnect my HDMI and it says hdmi no signal and it doesnt let me use the menu

[[☥] - CJ -]

So just to be certain
Youve tried ONLY having the DVI cable connected and switched to the DVI input of the monitor? You'll likely have to manually switch to whichever input you want to use via the monitors settings

Turn the PC and Monitor off
Connect the DVI cable to the PC and the monitor, turn the PC on and wait for it to boot up THEN turn the monitor on and see what that does, just make sure the monitor chooses the correct Input

And double check what DVI cable you're using, whether its a DVI-D cable or DVI-I cable and what port its connected to the GPU

[Bad 💀 Motha]

Just press the button on the monitor that switches the input, it's a toggle button. You don't go into the osd menu for that.

[Nerdy Larry]

Początkowo opublikowane przez ☥ - CJ -:

So just to be certain
Youve tried ONLY having the DVI cable connected and switched to the DVI input of the monitor? You'll likely have to manually switch to whichever input you want to use via the monitors settings

Turn the PC and Monitor off
Connect the DVI cable to the PC and the monitor, turn the PC on and wait for it to boot up THEN turn the monitor on and see what that does, just make sure the monitor chooses the correct Input

And double check what DVI cable you're using, whether its a DVI-D cable or DVI-I cable and what port its connected to the GPU

I don’t see a VGI d to be connected to my graphics card