MSI afterburner overclock

[✪Rich&Nuts]

I recently got a new GPU and been doing research on overclocking. My temperatures during load on the GPU are 50-60C on unigine bench mark and other programs.
Here are my settings, and also is my fan speeds okay?
https://imgur.com/a/MLJYshX

[tacoshy]

If you temperature is fine and the overclock is stable then it is fine... Without even looking at the settings.

[LiMpY]

You know.. on your afterburner fan setting, you can move the start down to 0% fanspeed at 40c and then a straight line up like you have already. There's no point in running the fans at 40% when idling.
A couple other notes:
1) you can remove those unused 'points by hovering and pressing delete while on them.
2) you can add some hysteresis.. say about 3c, to give it some leeway without having to update the fan speed.
3) Your fanspeed is updating every 5 seconds (period) but not forced to change. Tick force update each period.
These are just starting points. Adjust as required.

[StarDusT_184]

i use a set of first point = 0% GPU Utilization >> 30 % fan
second point 60 % GPU Utilization >> 100 % fan velocity

[✪Rich&Nuts]

LiMpY님이 먼저 게시:

You know.. on your afterburner fan setting, you can move the start down to 0% fanspeed at 40c and then a straight line up like you have already. There's no point in running the fans at 40% when idling.
A couple other notes:
1) you can remove those unused 'points by hovering and pressing delete while on them.
2) you can add some hysteresis.. say about 3c, to give it some leeway without having to update the fan speed.
3) Your fanspeed is updating every 5 seconds (period) but not forced to change. Tick force update each period.
These are just starting points. Adjust as required.

Oh yeah I need to fix that thanks