Steam 설치
로그인
|
언어
简体中文(중국어 간체)
繁體中文(중국어 번체)
日本語(일본어)
ไทย(태국어)
Български(불가리아어)
Čeština(체코어)
Dansk(덴마크어)
Deutsch(독일어)
English(영어)
Español - España(스페인어 - 스페인)
Español - Latinoamérica(스페인어 - 중남미)
Ελληνικά(그리스어)
Français(프랑스어)
Italiano(이탈리아어)
Bahasa Indonesia(인도네시아어)
Magyar(헝가리어)
Nederlands(네덜란드어)
Norsk(노르웨이어)
Polski(폴란드어)
Português(포르투갈어 - 포르투갈)
Português - Brasil(포르투갈어 - 브라질)
Română(루마니아어)
Русский(러시아어)
Suomi(핀란드어)
Svenska(스웨덴어)
Türkçe(튀르키예어)
Tiếng Việt(베트남어)
Українська(우크라이나어)
번역 관련 문제 보고
More fans = same airflow with lower rpm/noise or more airflow with less noise
So it can cool better
In some cases like my gtx 1050ti it is not necessary because the card dose not generate a lot of heat
most cards have enogh cooling for their own needs
i had a passive 8800gt which used the cpu fan to cool it
and wf2 and tf2 cards with dual fans
all have done the job well
The cooler needs to cool the memory chips and VRM's (power circuitry) This is what dual/triple cooler GPU heatsinks are cooling. Each fan can be dedicated to cooling one specific area of the card, a one fan blower cant really do this efficently
With modern GPUs these three ke yareas need to be kept cool to get the best performance out of your GPU to allow for better clock speeds whether your are overclocking the card or not.
When you card starts to gets hot it will throttle, resulting in lower perfermance and you'll see frame drops in your game.
The rate of heat transfer is also dependent on the difference between the air temperature and hot object. The bigger the difference the more heat transfer. So as blowing cold air is the way to go I leave the side off my cases. The hotter the card, the more cold air is needed, so the more fans are needed.
Then there is blade shape and thickness, fan radios, rotation speed, air flow guides etc that all affect flow.
http://www8.basf.us/PLASTICSWEB/displayanyfile?id=0901a5e180004891
So the way that engineers check cooling performance is to just look up performance specs and reviews.