H100i v2 Profiles
Hello everybody, got my h100i v2 replaced and installed. It works now, but i need a help with the fan and pump profiles. Im really beginner on these things so, my fans right now are on Balanced mode and my pump is on quiet mode, while i game what profiles should i do so the fluid inside the AIO wont get really hot ? Any help is greatly appreciated!
PS: The pump liquid temp on idle is 22-23*C.
Legutóbb szerkesztette: vaticanpapa; 2018. márc. 12., 7:40
< >
15/5 megjegyzés mutatása
I always run the pump at max. Always.
The fans I set to performance while gaming.
I use the 150iPro
Run the pump at max and create a custom fan profile which makes the fans run at 30% +/-. you will have to figure out what works best for your setup yourself.
Vince eredeti hozzászólása:
I always run the pump at max. Always.
The fans I set to performance while gaming.
I use the 150iPro
So while you game you set fans to performance, what about while you are on desktop or just surfing the net?
1cekiller™ eredeti hozzászólása:
Vince eredeti hozzászólása:
I always run the pump at max. Always.
The fans I set to performance while gaming.
I use the 150iPro
So while you game you set fans to performance, what about while you are on desktop or just surfing the net?
Then cut them down my cpu sits overclcoked 24/7 i cut my fans down to 40% when doing menial stuff or just not using my pc during gaming i put them up to 70-80% depending on how cpu heavy. Fans are pretty cheap so ive always been of the mindset its cheaper to replace a fan than a gpu/cpu
I have the H100i V2. I used Corsair Link to create a Profile. Pump set to QUIET. Fans as follows... Based on H100i V2 Temp (under group) 20C/25%, 25C/27%, 30C/34%, 35/40, 40/47, 48/56. Keeps my Ryzen 5 2600X cool and quiet. PUBG 1 hour = 52C average in a room that is 25C right now. Once you create the Profile and APPLY IT... Then click OPTIONS, DEVICES and "Use current settings as default". That way you do not have to leave the software running. It is saved in the coolers memory. For kicks I set my RGB logo to light blue. When 40C or more RED. That way I know when the water is hot and the fan will be at 47%. My Radiator is mounted on TOP as an exhaust.
< >
15/5 megjegyzés mutatása
Laponként: 1530 50

Közzétéve: 2018. márc. 12., 7:38
Hozzászólások: 5