Все обсуждения > Форумы Steam > Hardware and Operating Systems > Подробности темы
Rumanesc Rapper 27 апр. 2019 г. в 5:15
Enable prefetcher and enable superfetcher (regedit)
Which value of those commands should i put to get BEST performance?
< >
Сообщения 1–6 из 6
Bad 💀 Motha 27 апр. 2019 г. в 6:47 
They should be disabled anyways
#1
Snow 27 апр. 2019 г. в 7:20 
Superfetch is just a modern prefetcher, so technically the same thing.
That thing analyzes app usage and tries to keep the most used files in RAM so the apps would launch faster, unless RAM is needed by something else. Unless you're on low amount of old slow RAM, or using NVMe SSD - there's no reason to turn it off.
#2
Bad 💀 Motha 27 апр. 2019 г. в 7:38 
It gets disabled by default for when installing WinOS to any ssd. It's meant for slow hdds
#3
Rumanesc Rapper 27 апр. 2019 г. в 11:00 
Автор сообщения: Bad 💀 Motha
It gets disabled by default for when installing WinOS to any ssd. It's meant for slow hdds

I dont have SSD :(
#4
Rumanesc Rapper 27 апр. 2019 г. в 11:00 
Автор сообщения: Snow
Superfetch is just a modern prefetcher, so technically the same thing.
That thing analyzes app usage and tries to keep the most used files in RAM so the apps would launch faster, unless RAM is needed by something else. Unless you're on low amount of old slow RAM, or using NVMe SSD - there's no reason to turn it off.

Slow RAM = DDR3??
#5
Bad 💀 Motha 27 апр. 2019 г. в 11:12 
Everything in WinOS regarding prefetching and the superfetch service should already be enabled and working properly if you installed WinOS to a mechanical hdd type
#6
< >
Сообщения 1–6 из 6
Показывать на странице: 1530 50

Все обсуждения > Форумы Steam > Hardware and Operating Systems > Подробности темы
Дата создания: 27 апр. 2019 г. в 5:15
Сообщений: 6
Новое обсуждение

Правила обсуждений