Instale o Steam
iniciar sessão
|
idioma
简体中文 (Chinês simplificado)
繁體中文 (Chinês tradicional)
日本語 (Japonês)
한국어 (Coreano)
ไทย (Tailandês)
Български (Búlgaro)
Čeština (Tcheco)
Dansk (Dinamarquês)
Deutsch (Alemão)
English (Inglês)
Español-España (Espanhol — Espanha)
Español-Latinoamérica (Espanhol — América Latina)
Ελληνικά (Grego)
Français (Francês)
Italiano (Italiano)
Bahasa Indonesia (Indonésio)
Magyar (Húngaro)
Nederlands (Holandês)
Norsk (Norueguês)
Polski (Polonês)
Português (Portugal)
Română (Romeno)
Русский (Russo)
Suomi (Finlandês)
Svenska (Sueco)
Türkçe (Turco)
Tiếng Việt (Vietnamita)
Українська (Ucraniano)
Relatar um problema com a tradução
By all logic the stock cooler fan is not an option for OP. I now understand more as to why the Ryzen 5 3600 is the best all around CPU for gamers.
I've recorded it from 1Meter away.
i could try a APP for checking the decibels but idk if this is precise engouh?
Make sure you're applying thermal paste as well. One way i did it was apply a little of the paste, and use a credit card or any card to spread the paste into a thin layer on the CPU then apply cooler. I did this on a hyper 212 evo and got 20 on idle, 40 while gaming on a 6700k
The mounting pressure from the cooler/block is more than enough to spread most pastes, and that is a fact. I have never spread average pastes like NT-H1 or Arctic MX, all I do is the basic pea size dot in the center of the IHS, and they always came out with full coverage when I took the cooler off.
Nor do you need much paste, because all the paste is for is filling in microscopic gaps in the IHS.
I had experiences with both DRP4 and D15S. D15S is easier to install and has better PCI-E slot and RAM clearance. But DRP4 is way better looking.
Get Arctic Silver 5 or Arctic Cooling MX4
Do you have enough case fans with decent airflow, that's a must.
Honestly you could just get a Hyper212 EVO as long as it ships with the am4 bracket it should do very well. You don't need no 50+ $ cooler for a 3600, even of u OC it