Realbench 2.56 Luxmark - driver crash on good 2080 Ti Aorus

Toate discuțiile > Forumuri Steam > Hardware and Operating Systems > Detaliile subiectului

das3erawsdas 31 mai 2019 la 11:58

Hi. Have an question.
My pc:
9900K stock
2x16GB DDR4 GSKILL 3000MHZ
Asus Prime Z390-A
Corsair 850RmX
2080 Ti Aorus Xtreme, stock , no OC

Using Realbench 2.56. So i run benchmark and when it go to OPENCL test ( bowl ) i touched incidentally mouse test aborted but screen go black, i heard for a 1 second loud gpu fans, and driver crashed.
I tried to reproduce this but it not happening again.I am trying to abort test but driver not crashing again. Should i worry?
Its Realbench 2.56 ver.

My nvidia drivers are the newest. All games are stable , never had single driver crash yet. Bios to date in mobo.
Or maybe LUXMARK is very catchy about gpus oc ( factory ) ?

< >

Se afișează 1-10 din 10 comentarii

Bad 💀 Motha 31 mai 2019 la 12:02

Undo any OC then reboot and try the tests again. If stable at stock speeds the it's not a driver issue

Editat ultima dată de Bad 💀 Motha; 31 mai 2019 la 12:02

das3erawsdas 31 mai 2019 la 12:41

I said all is stock, GPU stock,CPU stock

Bad 💀 Motha 31 mai 2019 la 13:38

Then try different benchmarks.
3dmark
Unigine
Aida64
Cinebench

[☥] - CJ - 31 mai 2019 la 13:52

It is possible that the bench is sensitive to the factory OC, thats always a possibility
BUT
If you have no problems while actually gaming, its not something you should be all that worried about.

there are a number of things that can cause the driver to crash though, OC stability obviously being one of them.

Have you tried using MSI Afterburner to raise the power target? a little more available power may make it more stable.

Elon Mosque 31 mai 2019 la 14:36

It may be an crash happened for only once. I doubt the factory OC is unstable but if the games are working without any issue I dont think you should worry. Alternatively if you want to test more. You can try other drivers with a clean install of them.

das3erawsdas 31 mai 2019 la 15:00

IT not crashed in test,but when i touch mouse and test aborted / stopped. In this moment.

Maybe VDROP? Because in test was 4700mhz 1.260v and when i click stop it dropped to 0.620v and then it crashed with black screen. Or that doesnt matter? LLC is level 2. Also i cant reproduce issue with the same scenario.

Editat ultima dată de das3erawsdas; 31 mai 2019 la 15:02

Elon Mosque 31 mai 2019 la 15:06

Postat inițial de das3erawsdas:
IT not crashed in test,but when i touch mouse and test aborted / stopped. In this moment.

Maybe VDROP? Because in test was 4700mhz 1.260v and when i click stop it dropped to 0.620v and then it crashed with black screen. Or that doesnt matter? LLC is level 2. Also i cant reproduce issue with the same scenario.

Looks like multi core enhancement is on maybe you can fiddle with LLC levels to see if it affects the stability or you can just increase the voltage a bit.