"Wi-Fi 2" Doesn't have a valid IP Configuration error windows 10
Hello,
As the title states my wireless network adapter whenever it connects to my WI-FI network, it is not able to connect to the internet and doesn't seem to have a valid ip configuration, I have done the following things to try and fix the problem with no luck in being able to fix the problem as of yet:

Fixes tried:
-Uninstalling Realtek Pci-E family controller
-restarting the computer
-reinstalling the realtek family controller driver
-running command prompt administrator with the following commands:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /flushdns
ipconfig /renew

-resetting the computer to a restore point before the issue happened
-forgetting my wireless network
-manually assigning IPv4 Address
-manually assigning dhcp address
------------------------------------------------------------------------------------------------------------------------------------------
All above attempts have been tried and failed no matter how many times I have tried to restart the computer, etc.

I am posting here to hope that someone will help me get this fixed.
< >
Näytetään 1-15 / 19 kommentista
Have you tried power cycling the router? Most likely the DHCP server is not working. Restarting the router should fix this.

What is the output from "ipconfig /all"?
Omega lähetti viestin:
Have you tried power cycling the router? Most likely the DHCP server is not working. Restarting the router should fix this.

What is the output from "ipconfig /all"?
I have tried to restart the router as well and it still puts out the same error in troubleshootr when connected

the results of ipconfig /all usually present me with an ip address and a link-local ipv6 address, the dhcp server is shown as a default one

but I will try to power-cycle my router
_I_ 7.6.2019 klo 23.25 
sounds like that wifi is not configured correctly
using another connection log into the router and check its settings
_I_ lähetti viestin:
sounds like that wifi is not configured correctly
using another connection log into the router and check its settings
Connection log? How do I do that? Also, I have talked to my internet provider and they are sending a tech out to check the router and line.
use its lan connection, and log into the router

its ip is the dhcp/dns server from ipconfig /all
Make sure Win10 Network is set to Private, not Public
_I_ lähetti viestin:
use its lan connection, and log into the router

its ip is the dhcp/dns server from ipconfig /all
I dont have a cable long enough to be able to run it to my computer and my house doesnt exactly have a good path where I could run the cable to my room where my computer is and avoid anyone falling over.
_I_ 8.6.2019 klo 10.59 
then hold the reset button on the router for 30sec
or 30/30/30 it to force it to factory defaults
iMPERIALWOLF lähetti viestin:
the results of ipconfig /all usually present me with an ip address and a link-local ipv6 address, the dhcp server is shown as a default one

but I will try to power-cycle my router

Please, copy paste the output here
iMPERIALWOLF lähetti viestin:
_I_ lähetti viestin:
sounds like that wifi is not configured correctly
using another connection log into the router and check its settings
Connection log? How do I do that? Also, I have talked to my internet provider and they are sending a tech out to check the router and line.
Seriously? ISPs can do that all from their "arm chair"
How far is the PC from the Router?
Interference can cause such issues
have you tried this simple "ipconfig release" command ?
https://www.tp-link.com/us/support/faq/840/
chiefputsilao✖️ping lähetti viestin:
have you tried this simple "ipconfig release" command ?
https://www.tp-link.com/us/support/faq/840/

He did, its in the OP
☥ - CJ - lähetti viestin:
He did, its in the OP
yup, my bad.

try to do the ipconfig thingy using a pc connected to the router via LAN cable. afterwards, use the wifi adapter and see if the problem is resolved.
chiefputsilao✖️ping lähetti viestin:
☥ - CJ - lähetti viestin:
He did, its in the OP
yup, my bad.

try to do the ipconfig thingy using a pc connected to the router via LAN cable. afterwards, use the wifi adapter and see if the problem is resolved.

I have done that check my op post
< >
Näytetään 1-15 / 19 kommentista
Sivua kohden: 1530 50

Lähetetty: 7.6.2019 klo 22.45
Viestejä: 19