Instal Steam
login
|
bahasa
简体中文 (Tionghoa Sederhana)
繁體中文 (Tionghoa Tradisional)
日本語 (Bahasa Jepang)
한국어 (Bahasa Korea)
ไทย (Bahasa Thai)
Български (Bahasa Bulgaria)
Čeština (Bahasa Ceko)
Dansk (Bahasa Denmark)
Deutsch (Bahasa Jerman)
English (Bahasa Inggris)
Español - España (Bahasa Spanyol - Spanyol)
Español - Latinoamérica (Bahasa Spanyol - Amerika Latin)
Ελληνικά (Bahasa Yunani)
Français (Bahasa Prancis)
Italiano (Bahasa Italia)
Magyar (Bahasa Hungaria)
Nederlands (Bahasa Belanda)
Norsk (Bahasa Norwegia)
Polski (Bahasa Polandia)
Português (Portugis - Portugal)
Português-Brasil (Bahasa Portugis-Brasil)
Română (Bahasa Rumania)
Русский (Bahasa Rusia)
Suomi (Bahasa Finlandia)
Svenska (Bahasa Swedia)
Türkçe (Bahasa Turki)
Tiếng Việt (Bahasa Vietnam)
Українська (Bahasa Ukraina)
Laporkan kesalahan penerjemahan
Open CMD, type ipconfig, and check the IP address to your modem, if it is 254 then that what it is, but if it 0.1 then something not adding up, as should be connecting to the address it reported back to you when you did up check.
If you want to confirm something, and don't mind resetting everything up for any changes you made on your modem, I suggest manufacturer hard reset, which there should be a button to press and need to hold it for period of time, afterward it will wipe everything, and reset itself to what it was set by the manufacturer by the firmware update.
manual: https://www.netplusfr.ch/sites/default/files/fichiers/doc_mode_emploi_-_i6800_en.pdf
Do not connect to router with wifi. Especially if it says, not https
My aunt's ISP doesn't want users messing with the box, so they set a different login for their "service technicians"
Guy in a van, service technician, same difference.
Read the manual. It tells ip and login. (Which you should change for security reasons)
Having *.254 as the router ip is not as unusual as you think. Maybe not that usual for home networks but if you go into business networks the router is set to the last address in the network most of the time
This is sometimes done to confuse some viruses and hackers who may well assume 192.168.0.1 or 192.168.1.1
Routers may also assign unusual ip's in the nat tables too, for exactly the same reason.
Doesn't sound logical, simply use the Gateway IP. Which "surprisingly" is the same as the management IPs in pretty much any consumer router.