Router help

[Flopzy]

Usually a router a ip is something like 192.168.0.1 but mine is 192.168.1.254 is that normal? ( i have icotera i6800) also i cant login i have tried all the default ones like user, admin, blank, operator, all with big letters in front too! It also says not secure in top left corner like it's not the real thing

[Kargor]

There is no law that requires a router to have a *.1 address.

[Dr.Shadowds 🐉]

Normally it's 192.168.0.1 unless someone changes it, or was changed by your ISP Firmware update, idk what to tell you.

Open CMD, type ipconfig, and check the IP address to your modem, if it is 254 then that what it is, but if it 0.1 then something not adding up, as should be connecting to the address it reported back to you when you did up check.

If you want to confirm something, and don't mind resetting everything up for any changes you made on your modem, I suggest manufacturer hard reset, which there should be a button to press and need to hold it for period of time, afterward it will wipe everything, and reset itself to what it was set by the manufacturer by the firmware update.

[8ullfrog]

Some ISP's don't allow router logins. I'd say more, but I don't know if that would be considered circumventing a service agreement.


manual: https://www.netplusfr.ch/sites/default/files/fichiers/doc_mode_emploi_-_i6800_en.pdf

[Muppet among Puppets]

Read the manual

Do not connect to router with wifi. Especially if it says, not https

[8ullfrog]

hah, I skimmed it, I don't think they actually say, they just skip right to the management page. Apparently icotera likes secrets.

My aunt's ISP doesn't want users messing with the box, so they set a different login for their "service technicians"

Guy in a van, service technician, same difference.

[Flopzy]

Skip right to the management page? When i type in the ip it goes to the login page and what do you mean by isp’s dont allow logind

[Flopzy]

And to muppet mine does say http and i have tried the wiri login

[Flopzy]

To Dr.Shadowds before i typed ip into the browser the ip it didnt show any default gateway but now when i have typed it into the browser it only shows it in the top one

[Muppet among Puppets]

Escrito originalmente por Flopzy:

And to muppet mine does say http and i have tried the wiri login

Dont use wifi when its only http.

Read the manual. It tells ip and login. (Which you should change for security reasons)

[Rehlachs]

Escrito originalmente por Flopzy:

Usually a router a ip is something like 192.168.0.1 but mine is 192.168.1.254 is that normal? ( i have icotera i6800)

Having *.254 as the router ip is not as unusual as you think. Maybe not that usual for home networks but if you go into business networks the router is set to the last address in the network most of the time

[Pocahawtness]

Escrito originalmente por Flopzy:

Usually a router a ip is something like 192.168.0.1 but mine is 192.168.1.254 is that normal? ( i have icotera i6800) also i cant login i have tried all the default ones like user, admin, blank, operator, all with big letters in front too! It also says not secure in top left corner like it's not the real thing

This is sometimes done to confuse some viruses and hackers who may well assume 192.168.0.1 or 192.168.1.1
Routers may also assign unusual ip's in the nat tables too, for exactly the same reason.

[schizo]

how about u don’t release a ip online

[8ullfrog]

What I meant is that some ISP's don't want their customers changing any settings in the modem/gateway.

[Cathulhu]

Escrito originalmente por the white van 8==>:

how about u don’t release a ip online

Maybe you should learn the difference between public and private IPs.

Escrito originalmente por ｢C❤️A｣ Pocahawtness:

Escrito originalmente por Flopzy:

Usually a router a ip is something like 192.168.0.1 but mine is 192.168.1.254 is that normal? ( i have icotera i6800) also i cant login i have tried all the default ones like user, admin, blank, operator, all with big letters in front too! It also says not secure in top left corner like it's not the real thing

This is sometimes done to confuse some viruses and hackers who may well assume 192.168.0.1 or 192.168.1.1
Routers may also assign unusual ip's in the nat tables too, for exactly the same reason.

Doesn't sound logical, simply use the Gateway IP. Which "surprisingly" is the same as the management IPs in pretty much any consumer router.

[schizo]

Escrito originalmente por Cathulhu:

Escrito originalmente por the white van 8==>:

how about u don’t release a ip online

Maybe you should learn the difference between public and private IPs.

Escrito originalmente por ｢C❤️A｣ Pocahawtness:

This is sometimes done to confuse some viruses and hackers who may well assume 192.168.0.1 or 192.168.1.1
Routers may also assign unusual ip's in the nat tables too, for exactly the same reason.

Doesn't sound logical, simply use the Gateway IP. Which "surprisingly" is the same as the management IPs in pretty much any consumer router.

u can still figure out someone’s location with a public or private ip