Tutte le discussioni > Discussioni di Steam > Hardware and Operating Systems > Dettagli della discussione
PepuroniPeetsa 31 dic 2017, ore 17:43
CoolerMaster Masterbox 5 Fan Swap
I have a Cyberpower Xtreme vr, this model to be exact: https://www.amazon.com/gp/product/B01HNBLHAA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

No I didn't pay 3 grand for it, I got it in 2016 for $700. Anyways, I want to swap out the fans for some RGB fans. Anyways, how would I take the front fans out? I literally can't find any screws anywhere to unscrew them. I can't even find the cord for the ones on the front. I can take out the ones on the back, but not the front. Anybody with this case or this PC, can I get some help?
< >
Visualizzazione di 1-6 commenti su 6
Omega 31 dic 2017, ore 17:54 
You will most likely have to remove the front panel to gain access to the screws holding in the fans.

The front panel is usually secured by several latches and can be removed without any tools.
#1
PepuroniPeetsa 31 dic 2017, ore 17:59 
I took off the fan covers and the side covers and couldn't find them. Once I get home on Tuesday I'll try it again.
#2
Omega 31 dic 2017, ore 18:10 
Fan covers?

You will have to remove both side panels, then grab the front panel on the bottom, then unhook one of the latches on the bottom and pull the front panel away from the case.
https://youtu.be/cEu_HL77KfI

The manual for your case should also detail how to do this.
#3
PepuroniPeetsa 31 dic 2017, ore 18:14 
I meant the mesh part on the front. I was in a rush when I typed that. Thanks for linking this!
#4
Bad 💀 Motha 1 gen 2018, ore 0:53 
There are no screws for fans on the MasterCase5.
There are rubber push-pins; they use these to avoid fan vibrations. Simply pinch the other side of the push-pin, and while doing so, gently pull the fan away from the case and/or opposite direction of where the push-pin is sticking into its hole.
Ultima modifica da Bad 💀 Motha; 1 gen 2018, ore 0:55
#5
Arya 1 gen 2018, ore 1:18 
Messaggio originale di Zach:
I meant the mesh part on the front. I was in a rush when I typed that. Thanks for linking this!

Taking the mesh off is easy. There's a handle at the bottom of the mesh panel, reach your hand down and grab that, then pull towards you. The lower part of the mesh will pop out and drop away. You can pull the upper two mesh panels off just as easily once the main bit is removed.
#6
< >
Visualizzazione di 1-6 commenti su 6
Per pagina: 1530 50

Tutte le discussioni > Discussioni di Steam > Hardware and Operating Systems > Dettagli della discussione
Data di pubblicazione: 31 dic 2017, ore 17:43
Messaggi: 6
Inizia una nuova discussione

Regole e linee guida per le discussioni