Remove Front Bezel Corsair Crystal 680X

[Roasted Bunny]

https://imgur.com/a/hIyCYTP
It says in the manual that there’s 4 screws but I can’t find that in the case.

I see some by the fans but there’s no 4 lining up with each other like in the manual.

Anyone have the same case and know how to remove it? I need to clean the dust filter.

[Bad 💀 Motha]

The front cover should just pop off. Most cover like this on many cases now simply click into place.

[Roasted Bunny]

Origineel geplaatst door Bad 💀 Motha:

The front cover should just pop off. Most cover like this on many cases now simply click into place.

Where do I pull it?

[Bad 💀 Motha]

Did someone else build your PC, as you would had to remove the front panel when building.

The front panel is two halves divided into a 70/30 split. Look at the edges of the flat right side part of the front panel and gently pop it away from the front, it's tool less. Once removed now you have access to the left side of the front panel.

If you need a full visual walk through of the case and it's features inside and put with hands on showing everything, here...

https://youtu.be/Ik48WmrJrkI

[Roasted Bunny]

Origineel geplaatst door Bad 💀 Motha:

Did someone else build your PC, as you would had to remove the front panel when building.

The front panel is two halves divided into a 70/30 split. Look at the edges of the flat right side part of the front panel and gently pop it away from the front, it's tool less. Once removed now you have access to the left side of the front panel.

If you need a full visual walk through of the case and it's features inside and put with hands on showing everything, here...

https://youtu.be/Ik48WmrJrkI

Nope, I built the PC.

[Bad 💀 Motha]

Well when I build a PC I remove every single part to ensure I know how it goes together both ways, etc. Like with your case. But yea it's a shamd the filter doesn't slip out the top or bottom. The other filters are much easier to remove. But once that front panel is off all you should need to do is vacuum off that front area and be done with that part.

[A Hero In Hell]

Origineel geplaatst door Roasted Bunny:

https://imgur.com/a/hIyCYTP
It says in the manual that there’s 4 screws but I can’t find that in the case.

I see some by the fans but there’s no 4 lining up with each other like in the manual.

Anyone have the same case and know how to remove it? I need to clean the dust filter.

Did you manage to sort this? I need to do the same. However it looks like upon close inspection that the whole of the front panel is a one piece construction. You can see this if you look inside the case. The glass half, at the edge on the inside of the case has 3 black screws that you need to undo. On the other side of the case, where the PSU is located, it looks like there are 6 flexi metal restraints (kind of like clips) that are held in by screws. I believe if you undo all six along with the 3 black screws that the whole of the front will come off. The manual I believe is incredibly misleading and doesn't explain in detail enough whereas it's useless.

[Bad 💀 Motha]

So you couldn't simply Google search:

corsair crystal 680x front panel removal

Why do you folks make stuff so hard?

[A Hero In Hell]

Origineel geplaatst door Bad 💀 Motha:

So you couldn't simply Google search:

corsair crystal 680x front panel removal

Why do you folks make stuff so hard?

Don't you think people have already tied that but come up short, hence why they are asking here? I tell you what, you google it, and let me know how you get on :)

[DeadBeat]

If you open the side door there's two thumb screws just on the inside of the door. If you remove them you can take out the screen provided you have enough clearance between the fan bracket and the gpu. You have to be very careful especially if you have you fan cables rather tight as you could cause damage to them. For me to do that the gpu had to come out so I ended up taking the glass out which was not an easy task because for some reason Corsair in their infinite wisdom didn't want that glass to come out.

[Bad 💀 Motha]

Yea it's not hard. It is rather tedious though.

[A Hero In Hell]

Origineel geplaatst door DeadBeat:

If you open the side door there's two thumb screws just on the inside of the door. If you remove them you can take out the screen provided you have enough clearance between the fan bracket and the gpu. You have to be very careful especially if you have you fan cables rather tight as you could cause damage to them. For me to do that the gpu had to come out so I ended up taking the glass out which was not an easy task because for some reason Corsair in their infinite wisdom didn't want that glass to come out.

No, that's not want people are after. They want to remove the whole of the front fascia, and not one website or video explains how to do this. I'll wait for you link to prove me wrong!

[DeadBeat]

Origineel geplaatst door Roasted Bunny:

https://imgur.com/a/hIyCYTP
It says in the manual that there’s 4 screws but I can’t find that in the case.

I see some by the fans but there’s no 4 lining up with each other like in the manual.

Anyone have the same case and know how to remove it? I need to clean the dust filter.

Ok I gave some bad advice in my previous post. It's been awhile since I used that case so you'll have to forgive me.
-first remove the black panel at the front of the case by pulling it off from the bottom. It just pops off easily provided you don't reef on it or anything.
-second open the side door and remove the three screws next to the fan bracket(they'll be to the right of the thumb screws)
-third remove the four small screws at the front of the case which will free up the front panel giving you access to the dust screen.

https://steamcommunity.com/sharedfiles/filedetails/?id=2893905097

I took the glass off mine but it was a pain in the ass.