Intel 1150 cooler stuck to motherboard :: Hardware and Operating Systems

Todas as discussões > Fóruns Steam > Hardware and Operating Systems > Detalhes do tópico

GoldstoneVillas 16/out./2019 às 11:01

Intel 1150 cooler stuck to motherboard

All pins unlocked
Plastic top of cooler has come away from metal blades.
Twisted cooler like jam jar left/right hard. Hard to hold onto the blades when twisting.
Heated cooler area with hairdryer no luck.
Tried floss no luck.

Any ideas please ? and I don't care about damaging removed CPU.

< >

Exibindo comentários 16–30 de 32

GoldstoneVillas 17/out./2019 às 5:21

The plastic fan top I can remove leaving just blades underneath but still not budge

#16

chiefputsilao✖️ping 17/out./2019 às 5:22

the new links work

how to remove heat sink fan:
https://www.youtube.com/watch?v=AegVBU_fo-8

#17

Omega 17/out./2019 às 5:22

Those plastic things on each of the 4 corners, turn those in the direction of the arrow.

#18

GoldstoneVillas 17/out./2019 às 5:24

https://ibb.co/D7WK9Tc

#19

GoldstoneVillas 17/out./2019 às 5:25

I have had the top half of the cooler removed leaving above photo

#20

chiefputsilao✖️ping 17/out./2019 às 5:25

lol. it was really stuck.

#21

GoldstoneVillas 17/out./2019 às 5:27

Are the rivets in the photo showing the back of motherboard holding this in place ?

#22

Omega 17/out./2019 às 5:29

These coolers don't require any screws.

Someone mistook the super glue for thermal paste, or this is the worst thermal paste I have ever seen.

#23

chiefputsilao✖️ping 17/out./2019 às 5:30

someone placed a real paste and not thermal paste there.,

the trick is to remove the cpu latch/lever without damaging the motherboard

#24

GoldstoneVillas 17/out./2019 às 5:30

Any ideas of how to prize away please without damage ?

#25

chiefputsilao✖️ping 17/out./2019 às 5:33

a screwdriver for watch may work but practice first on dead motherboard
https://www.esslinger.com/watch-screwdrivers-1/

imitation watch screwdriver set in the philippines costs about 1-2 dollars

#26

GoldstoneVillas 17/out./2019 às 5:44

I have given up. I have tried with force using a small screwdriver to prize upwards but not judging a worried of causing damage. I can unclip the cpu latch. Thanks anyway.

#27