ethernet doesn't have a valid ip configuration?
ethernet doesn't have a valid ip configuration windows 8 help pls
< >
Affichage des commentaires 1 à 15 sur 15
Help?
My ethernet is fine with my other devices, but on my pc its not working..I get that yellow triangle thingy. I tried upgrading my driver. I tried everything. It’s just not working. If you have any suggestions please right it down below.
Right click the Windows start button > Device Manager > Network adapters > Right click and uninstall all devices > Reboot your PC.

Pro tip: Have your motherboard LAN and WIFI (If applicable) drivers downloaded in case you need them.
Why should i uninstall my device managers?
Omega a écrit :
Right click the Windows start button > Device Manager > Network adapters > Right click and uninstall all devices > Reboot your PC.

Pro tip: Have your motherboard LAN and WIFI (If applicable) drivers downloaded in case you need them.
Nami l Society.gg a écrit :
Why should i uninstall my device managers?
Omega a écrit :
Right click the Windows start button > Device Manager > Network adapters > Right click and uninstall all devices > Reboot your PC.

Pro tip: Have your motherboard LAN and WIFI (If applicable) drivers downloaded in case you need them.
You will not uninstall "Device managers".. you will uninstall the LAN drivers, doing this will make sure it is not a driver issue (which it most likely is).
Omega a écrit :
Nami l Society.gg a écrit :
Why should i uninstall my device managers?
You will not uninstall "Device managers".. you will uninstall the LAN drivers, doing this will make sure it is not a driver issue (which it most likely is).
Yes i had that problem too.
When i did that it worked again.
Its the best option.
Ok thank you ❤️
Omega a écrit :
Nami l Society.gg a écrit :
Why should i uninstall my device managers?
You will not uninstall "Device managers".. you will uninstall the LAN drivers, doing this will make sure it is not a driver issue (which it most likely is).
Reset your router, unplug the router from power for about 1 minute then plug it back in.
Can you share the "ipconfig" command output?
^This

Press Windows key+S on your keyboard and type CMD, then run the ipconfig command.
Had the same problem
Set the Network type to Private, not Public.
Then reboot the system, or disable the network adapter, wait 30 secs, and then re-enable it.
I had the exact same problem but i figured mine out cuz i had two cables, one worked the other didnt.
Dernière modification de The Queen Of UwU; 12 oct. 2017 à 5h01
x_wing a écrit :
Can you share the "ipconfig" command output?
Yeah sure 2 sec
< >
Affichage des commentaires 1 à 15 sur 15
Par page : 1530 50

Posté le 11 oct. 2017 à 5h50
Messages : 15