Corsair Vengeance LPX 16GB DDR4 DRAM 2800MHz C16 Memory + Gigabyte Z170XP-SLI

[You Silly Humans]

I have a question regarding the above Crosair memory in combination with the above Gigabyte motherboard.

My current build features the listed Gigabyte motherboard with “ 16 GB DDR4 2800MHz Digital Storm Ceritified Perfmorance Series “ Ram.

I want to upgrade to 32 GBs. Am I good to go with the Corsair Vengence 2800MHz memory? They would run side by side with the generic memory I have already installed. From what I’m gathering it looks like everything would run fine with the board, but would appreciate any input before I drop 160 on the RAM. I’m admittedly ignorant when it comes to many things with computer builds, slowly learning.

I just want to make sure my two different memory types would run fine and I’d be getting the most out of them ( 2800 MHz ) with my motherboard, since both memory types appear to be statistically the same on paper to my eyes.. Thanks

[Bad 💀 Motha]

First, run CPU-Z App and do a Validation > Submit
Share the provided web url address that opens up in your web browser, into here.

Then we can see what is the exact, current RAM that is installed.

[[☥] - CJ -]

I would honestly not mix and match RAM
In theory they could work perfectly together if they are the same spec

But its usually best to always match RAM

[You Silly Humans]

Originally posted by Bad_Motha:

First, run CPU-Z App and do a Validation > Submit
Share the provided web url address that opens up in your web browser, into here.

Then we can see what is the exact, current RAM that is installed.

https://valid.x86.fr/d60gpv



" Memory (RAM)
Total Size
16384 MB
Type
Dual Channel (128 bit) DDR4-SDRAM
Frequency
1066.5 MHz - Ratio 1:16
Timings
15-15-15-36-2 (tCAS-tRC-tRP-tRAS-tCR)
Slot #1 Module
A-Data Technology 8192 MB (DDR4-2137) - XMP 2.0 - P/N: DDR4 3000 2OZ
Slot #2 Module
A-Data Technology 8192 MB (DDR4-2137) - XMP 2.0 - P/N: DDR4 3000 2OZ
"

[Bad 💀 Motha]

Well for one thing, your current RAM is DDR4-3000
But XMP is not enabled in the BIOS, so it's only running at 2133 right now.

Ok validation only helped a little.

Can you launch CPU-Z, then click on the SPD tab at top.
Select a slot to see each installed RAM.
Pick a slot, then tell us what the "Part Number" is that is listed in there please.

This will allow to find you matches.

[You Silly Humans]

Originally posted by Bad_Motha:

Well for one thing, your current RAM is DDR4-3000
But XMP is not enabled in the BIOS, so it's only running at 2133 right now.

Ok validation only helped a little.

Can you launch CPU-Z, then click on the SPD tab at top.
Select a slot to see each installed RAM.
Pick a slot, then tell us what the "Part Number" is that is listed in there please.

This will allow to find you matches.

Thanks man that's odd, part number ( DDR4 3000 2OZ ) is all it says similar to the validation list

[Bad 💀 Motha]

Yea not sure why it says that, it should be something like this for ADATA...

(Just an example) > AX4U300038G16-DRG
Does is show this anywhere in CPU-Z > SPD tab starting with an AX ?

Best bet would be shutdown the PC, open the case, and remove 1x RAM and look at the full model # listed on the RAM's sticker.

(example of the sticker) > http://darktech-reviews.com/wp-content/uploads/2017/09/DSC_0024.jpg

[You Silly Humans]

Originally posted by Bad_Motha:

Yea not sure why it says that, it should be something like this for ADATA...

(Just an example) > AX4U300038G16-DRG
Does is show this anywhere in CPU-Z > SPD tab starting with an AX ?

Best bet would be shutdown the PC, open the case, and remove 1x RAM and look at the full model # listed on the RAM's sticker.

(example of the sticker) > http://darktech-reviews.com/wp-content/uploads/2017/09/DSC_0024.jpg

Alright so I opened her up and the sticks have been redesigned black with a big digital storm logo, no AX part number in sight. The listed number is DS4U3000W8G16

https://imgur.com/a/sAFeQ

When I had my PC built I just chose their " generic certified RAM by digital storm " I knew I should have went for a brand name, but this was cheaper at the time.

So rebranded A-data sticks.. lol

I liked the idea of crosair to up my ram only because I could find them prime on Amazon, and Amazon takes anything back without questions if I have a problem within 30 days after purchase.

[Bad 💀 Motha]

Here these should be ok.

https://www.amazon.com/dp/B0134EW7G8

Once installed, enter the BIOS and enable XMP.

Originally posted by Gigabyte Manual for GA-Z170XP-SLI:

Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled.
Disabled Disables this function. (Default)
Profile1 - Uses Profile 1 settings
Profile2 - Uses Profile 2 settings


Advanced Memory Settings
* ExtremeMemory Profile (X.M.P.)
System Memory Multiplier and Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu.

* Memory Boot Mode
Provides memory detection and training methods.
Auto - Lets the BIOS automatically configure this setting. (Default)
Enable Fast Boot - Skip memory detection and training for faster memory boot.
Disable Fast Boot - Detect and train memory at every single boot.

^ Choose Profile1 and see if that is "3000Mhz", if not, select Profile2
^ Disable Fast Boot
Then Save & Exit the BIOS.


If you do get odd hiccups then I would suggest:
> Disable XMP, but then you will have paid for 3000Mhz RAM, that is going to run now at 2133 only, due to issues or conflicts.
> Return the RAM (Amazon has great policy for that)
> Sell the ADATA RAM and replace those with another Corsair kit of the same exact model

[You Silly Humans]

Originally posted by Bad_Motha:

Here these should be ok.

https://www.amazon.com/dp/B0134EW7G8

Once installed, enter the BIOS and enable XMP.

Originally posted by Gigabyte Manual for GA-Z170XP-SLI:

Extreme Memory Profile (X.M.P.) (Note 2)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Profile1 Uses Profile 1 settings.
Profile2 (Note 2) Uses Profile 2 settings


Advanced Memory Settings
& ExtremeMemory Profile (X.M.P.) (Note 2), System MemoryMultiplier,Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Boot Mode (Note 2)
Provides memory detection and training methods.
Auto Lets the BIOS automatically configure this setting. (Default)
Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.

^ Choose Profile1 and see if that is "3000Mhz", if not, select Profile2
^ Disable Fast Boot
Then Save & Exit the BIOS.


If you do get odd hiccups then I would suggest:
> Disable XMP, but then you will have paid for 3000Mhz RAM, that is going to run now at 2133 only, due to issues or conflicts.
> Return the RAM (Amazon has great policy for that)
> Sell the ADATA RAM and replace those with another Corsair kit of the same exact model

Thank you I will save this thread for future refrence. I'm thinking of just going straight to plan B as you suggested, sell the ADATA RAM and just pick up two 16GB Crosair at 3000MHz.

What do you think? https://www.amazon.com/Corsair-Vengeance-3000MHz-Desktop-Memory/dp/B014UYPEXE/ref=sr_1_2?ie=UTF8&qid=1507944934&sr=8-2&keywords=corsair%2Bram&th=1

Unless there is something better than I linked, and then I could in theory go up to 64 GB of RAM in the future, I just don't see why I ever would have to. I plan to keep the CPU / motherboard obviously and upgrade the GPU When the time comes.

[Bad 💀 Motha]

2x16GB that you linked > yes very good idea if you don't mind doing that.
Could definitely save you troubles / headaches in case those two models do not for some reason, get along well together.

I've seen such custom builders using TeamGroup or Patriot for cheaper RAM, but ADATA seems like an odd-ball one to me. I know this brand well, but usually you never see people using / selling those much within USA/CAN, usually in EU and ASIA, mostly.

ADATA is just not so much cheaper that I would ever consider them.

Crucial, Corsair or GSkill are very good bet for any RAM needs.

[You Silly Humans]

Originally posted by Bad_Motha:

2x16GB that you linked > yes very good idea if you don't mind doing that.
Could definitely save you troubles / headaches in case those two models do not for some reason, get along well together.

I've seen such custom builders using TeamGroup or Patriot for cheaper RAM, but ADATA seems like an odd-ball one to me. I know this brand well, but usually you never see people using / selling those much within USA/CAN, usually in EU and ASIA, mostly.

ADATA is just not so much cheaper that I would ever consider them.

Crucial, Corsair or GSkill are very good bet for any RAM needs.

Yeah I don't mind at all, So if I were to go with two 16GB sticks and I didn't mind the cost, would you say the Corsair LPX 32GB DRAM 3000MHz C15 Memory Kit for DDR4 above would be my best bet from Amazon?

I'm assuming I would still have to tinker with the bios to get them to run at 3000 MHz? And the 2133 MHz sticks are the same cost as the 3000.

I'm assuming my motherboard can run them up to the 3000 Mhz. I'll look at the brands you mentioned but if I see nothing else I'll just go with this and offer my A-datas for a good price just to move them.

[Bad 💀 Motha]

Very good RAM choice, yes... Most of the 3000 are well above $170 range

Yes it is normal to have to enter the BIOS and enable XMP.

Any DIY build you basically should always do that.
XMP or DRAM = AUTO is just for safe boot purposes, which is why is the default, so any installed RAM could potentially boot up fine when on AUTO, as long as compatible with the Motherboard. So yea you want to enable XMP profile, which will in turn enable the correct Frequency + Timings + Voltage for the installed RAM.

[You Silly Humans]

Originally posted by Bad_Motha:

Very good RAM choice, yes... Most of the 3000 are well above $170 range

Yes it is normal to have to enter the BIOS and enable XMP.

Any DIY build you basically should always do that.
XMP or DRAM = AUTO is just for safe boot purposes, which is why is the default, so any installed RAM could potentially boot up fine when on AUTO, as long as compatible with the Motherboard. So yea you want to enable XMP profile, which will in turn enable the correct Frequency + Timings + Voltage for the installed RAM.

Alright man thanks again,

The Gskill I'm seeing are all over the place 300+, nothing in crucial I found that is 3000, and they seem to have plenty of the Crosair direct we found so easy to replace if need be direct.

All I need is to replace the GPU when the time comes and add some storage space and I think this machine should be around for a long time.

Appreciate the help!