Bullett00th 5 ENE 2017 a las 9:01
Chieftec A-135 750w - should I change it?
i5 6600 non-k
16 Gb RAM
MSI H170 ATX motherboard
GTX 1080 from Palit (buying tomorrow)

Will this PSU be enough? I've alo read that it's not too reliable but I'm reluctant to changing it before I at least try. What's the worst that could happen?
< >
Mostrando 16-26 de 26 comentarios
Bad 💀 Motha 6 ENE 2017 a las 18:29 
Buy a brand you yourself can have faith in and trust.
Don't buy cause someone says a particular model is good.

I mean people see a Mustang and think, yea I'd love to have one. But that factor remains, can you trust Ford as a brand. Now this is just a broad example here is all. But you see my point.
Arya 6 ENE 2017 a las 18:31 
Publicado originalmente por Bad-Motha:
Buy a brand you yourself can have faith in and trust.
Don't buy cause someone says a particular model is good.

I mean people see a Mustang and think, yea I'd love to have one. But that factor remains, can you trust Ford as a brand. Now this is just a broad example here is all. But you see my point.

To expand on that, make sure you source up to date information about the brand. Reviews that are 3-4 years old aren't helpful.

To go back to Bad Motha's example, whether or not you can trust Ford varies year on year. They've been completely trustworthy at times, other times they've sold cars with a literal bomb in the trunk. It's the same with PSUs, Thermaltake are pretty good now but I had a terrible experience with them five years ago.
Última edición por Arya; 6 ENE 2017 a las 18:32
Bad 💀 Motha 6 ENE 2017 a las 18:34 
Again I wasn't picking on a brand; merely an example.

So yea if you are looking at a certain model of anything; yes look at the brand itself is all I really meant. Regardless of what it is you are looking to buy.
Bullett00th 7 ENE 2017 a las 5:37 
concerning the PSU:
I've dug around and of those available the most interesting one was Corsair RM650x in terms of price/quality, at least seemingly. I'm slightly worried about the cooling system which only turns on when under load, but maybe that's no issue.

Other options are Thermaltake Toughpower DPS G 650W, SeaSonic Platinum-660 and XFX Black Edition 650W.

All 80+ Gold standard. There are also option from Be Quiet, BitFenix and Enermax and Fractal Design but I haven't done the research on these brands yet.


Publicado originalmente por Bad-Motha:
Buy a brand you yourself can have faith in and trust.
Don't buy cause someone says a particular model is good.
It was difficult for me because I've had a Radeon on my last 4 rigs and learned to trust, love and cherish Sapphire, but they don't do Nvidia GPUs so it was terra incognita for me.

As for up to date reviews - again I've looked at recent user reviews as well as benchmarks mos of which are 4 to 6 months old.
https://www.youtube.com/watch?v=veqjL0i0D-s
Última edición por Bullett00th; 7 ENE 2017 a las 5:45
Arya 7 ENE 2017 a las 5:39 
That... review is for a GTX1060. A GTX1080 is a completely different animal.

Case in point: EVGA GTX1060s are alright but run a little hot, EVGA GTX1080s are infamous for sparking and bursting into flames/not having correct thermal pads/VRM issues/being possessed by wicked spirits/many other scandals.
Última edición por Arya; 7 ENE 2017 a las 5:40
Bullett00th 7 ENE 2017 a las 5:47 
My bad, wrong link. Either way I had a choice between EVGA, Inno3D and Palit for the 1080. Went for the latter, we'll see how it goes.

You can check this review since Gainward owns Palit (or the other way around, can't recall) and they pretty much use the same cooling architecture
https://www.youtube.com/watch?v=weLUc1ac1-U
Última edición por Bullett00th; 7 ENE 2017 a las 5:49
Arya 7 ENE 2017 a las 5:48 
I went with an Asus GTX1080 Strix. Maybe the best-built gaming part I've owned so far, honourable mention Cryorig R1 Ultimate.
Última edición por Arya; 7 ENE 2017 a las 5:48
Bullett00th 7 ENE 2017 a las 5:51 
Publicado originalmente por 狼 Wolfey 🔰:
I went with an Asus GTX1080 Strix. Maybe the best-built gaming part I've owned so far, honourable mention Cryorig R1 Ultimate.
yeah that's a great option but it was 150 bucks over what the Palit cost me. And Palit was already over $100 above my planned budget)
Kaihekoa 7 ENE 2017 a las 6:02 
Publicado originalmente por Bullett00th:
concerning the PSU:
I've dug around and of those available the most interesting one was Corsair RM650x in terms of price/quality, at least seemingly. I'm slightly worried about the cooling system which only turns on when under load, but maybe that's no issue.

Other options are Thermaltake Toughpower DPS G 650W, SeaSonic Platinum-660 and XFX Black Edition 650W.

I use the Corsair RM650X. Temperature is not an issue, and the fan only turning on under load is a good feature as it will reduce wear on the fan. It will provide more than enough power for any single GPU build. The 10 year warranty and price/performance value is why I bought it.
Arya 7 ENE 2017 a las 6:07 
Corsair's high-tier PSUs are outstanding. I've used their AX family for the last few years, they've been faultless.
Bullett00th 7 ENE 2017 a las 10:29 
Then it is decided.

Thank you very much everyone for dropping by and giving advice!
< >
Mostrando 16-26 de 26 comentarios
Por página: 1530 50

Publicado el: 5 ENE 2017 a las 9:01
Mensajes: 26