Інсталювати Steam
увійти
|
мова
简体中文 (спрощена китайська)
繁體中文 (традиційна китайська)
日本語 (японська)
한국어 (корейська)
ไทย (тайська)
Български (болгарська)
Čeština (чеська)
Dansk (данська)
Deutsch (німецька)
English (англійська)
Español - España (іспанська — Іспанія)
Español - Latinoamérica (іспанська — Латинська Америка)
Ελληνικά (грецька)
Français (французька)
Italiano (італійська)
Bahasa Indonesia (індонезійська)
Magyar (угорська)
Nederlands (нідерландська)
Norsk (норвезька)
Polski (польська)
Português (португальська — Португалія)
Português - Brasil (португальська — Бразилія)
Română (румунська)
Русский (російська)
Suomi (фінська)
Svenska (шведська)
Türkçe (турецька)
Tiếng Việt (в’єтнамська)
Повідомити про проблему з перекладом
I'd personally probably clean the old paste off the cooler/cpu and do a fresh application. DON'T "just add some". If you're going to reapply then do it over again, too much thermal paste is bad as well.
It's a pad and has only been used for 15 mins. Pads don't seperate like paste. Also, I should have said clean both surfaces first, I was making the assuption the OP would do so first. :D
But under loads is what really matters; even then, a heavy CPU stress test should heat it up much more then Games would. Now if you seeing 80*C on Intel CPUs, don't panic, as that is not that high for those, but if it continues to rise (especially creeping to 90*C) yes cancel the test and this could indicate poor overall airflow, poor CPU cooler, or not a good application of thermal paste.
Which Case do you have?