summy 26 kwietnia 2017 o 14:14
My keyboard is odd.
So, recently I got a used Razer Blackwidow 2014, and all was fine, but the spacebar is a little odd. Here's some photos, http://imgur.com/a/Xqxmn
And the keyboard incase you need it: https://ca.pcpartpicker.com/product/k9h9TW/razer-keyboard-rz0300392800r3u1
It is the strongest in the center of the spacebar, but the sides are very wobbly and need alot more pressure to actually register. How do I fix this?
< >
Wyświetlanie 1-8 z 8 komentarzy
[1DoD] Dodge 26 kwietnia 2017 o 15:47 
Lol, put a piece of soft foam on the outer left and right side of the space bar, cut them to about 4mmx4mmx1.5mm. I don't know if this is a normal issue for this keyboard so a non-makeshift fix is beyond me.
summy 26 kwietnia 2017 o 15:57 
Początkowo opublikowane przez 1DoD Sir Arthur Dayne:
Lol, put a piece of soft foam on the outer left and right side of the space bar, cut them to about 4mmx4mmx1.5mm. I don't know if this is a normal issue for this keyboard so a non-makeshift fix is beyond me.

I will be selling this, thanks for the response though.
2cat4u 26 kwietnia 2017 o 16:20 
That metal bar on your first picture is supposed to help with pressure distribution. Make sure to insert it properly into the space bar key in case you haven't.
summy 26 kwietnia 2017 o 16:22 
Początkowo opublikowane przez 2cat4u:
That metal bar on your first picture is supposed to help with pressure distribution. Make sure to insert it properly into the space bar key in case you haven't.

It doesn't fit the proper way.
2cat4u 26 kwietnia 2017 o 18:55 
Początkowo opublikowane przez Harley:
It doesn't fit the proper way.
Then you sure as hell are doing something wrong, or have done something wrong in the past.
I have a distinct feeling your space bar comes from a completely different keyboard.
Ostatnio edytowany przez: 2cat4u; 26 kwietnia 2017 o 21:10
summy 27 kwietnia 2017 o 3:08 
Początkowo opublikowane przez 2cat4u:
Początkowo opublikowane przez Harley:
It doesn't fit the proper way.
Then you sure as hell are doing something wrong, or have done something wrong in the past.
I have a distinct feeling your space bar comes from a completely different keyboard.

Well, that distinct feeling of yours is wrong. The spacebar is not from another keyboard. I've tried every which way possible to put the metal bar in the spacebar somehow, but as I said, I'll be selling it for this beauty. Nothing has worked.
https://www.amazon.ca/Mechanical-CK104-High-Speed-Ergonomics-Professional/dp/B01M4Q8TCX/ref=sr_1_3?s=electronics&ie=UTF8&qid=1493246772&sr=1-3&keywords=mechanical+keyboard
Ostatnio edytowany przez: summy; 27 kwietnia 2017 o 3:10
If that space bar does not go in it aint from that keyboard... how and why did you take the space bar off?

Tbh from your pictures it looks like it just slides on the cross goes in the middle the other 2 om the outside slide into the ouside lugs and the last one near the middle goes on mothing cos the spacebar is not just made for 1 keyboard.

That kryboard is a nice keybaord. Iv got a razer black widow chroma $200 keyboard and it works well.

Good luck trying to sell a broken keyboard. Your keyboard is worth $20 from the day you bought it same as most other tech items. There quote on quote "antique" b4 you buy it cos there already working on a new one when you buy there current.

No point in selling it.
Ostatnio edytowany przez: The HopelessGamer™; 27 kwietnia 2017 o 5:32
Revelene 27 kwietnia 2017 o 5:55 
You already had a previous thread about this going. Creating a new one was not necessary.

That spacebar appears that it could be the incorrect one. Perhaps you got it mixed up with another keyboard?

Or it could be broken?

It should have two clips, one on each end, to hold the two ends of the stability bar. If you pulled it straight up, without releasing the stability bar, it is likely that the clips broke clean off... Which is kinda what looks like happened.
Ostatnio edytowany przez: Revelene; 27 kwietnia 2017 o 6:16
< >
Wyświetlanie 1-8 z 8 komentarzy
Na stronę: 1530 50

Data napisania: 26 kwietnia 2017 o 14:14
Posty: 8