New GPU No Signal Error With Nvidia GeForce GT 730 2GB GDDR5

[Mason]

So i just received my Nvidia GeForce GT 730 2GB GDDR5. So after i uninstalled my previous gpu drivers and installed the GT 730 and rebooted my pc and i have sicome to the error i have made 100 % that it is not a driver issue, i have a 287.6 Watt PSU and the gpu needs a 300 Watt PSU but i don think it would disable the graphic please correct me if im wrong. so what im asking is anyone have a fix or know what my issue is???

PLEASE HELP!!!!!!

[Alexalmighty502 Sup Acc]

what was your old gpu?

[Mason]

Diposting pertama kali oleh Iknowwho:

Is your monitor plugged into the graphics port of the mainboard and not into the graphics card?

I tried both ports the one on my new gpu and the one on my integrated gpu

[Alexalmighty502 Sup Acc]

Diposting pertama kali oleh Anonymous:

Diposting pertama kali oleh Iknowwho:

Is your monitor plugged into the graphics port of the mainboard and not into the graphics card?

I tried both ports the one on my new gpu and the one on my integrated gpu

did you uninstall the intergrated gpu driver?

[Mason]

Diposting pertama kali oleh Alexalmighty502 Sup Acc:

what was your old gpu?

i had a integrated gpu, sorry i dont know what the name of it is i know it is amd how ever

[Mason]

Diposting pertama kali oleh Alexalmighty502 Sup Acc:

Diposting pertama kali oleh Anonymous:

I tried both ports the one on my new gpu and the one on my integrated gpu

did you uninstall the intergrated gpu driver?

yes

[Alexalmighty502 Sup Acc]

Diposting pertama kali oleh Anonymous:

Diposting pertama kali oleh Alexalmighty502 Sup Acc:

did you uninstall the intergrated gpu driver?

yes

remove the 730 and try to use the igpu again and see if it will work

[Mason]

Diposting pertama kali oleh Alexalmighty502 Sup Acc:

Diposting pertama kali oleh Anonymous:

yes

remove the 730 and try to use the igpu again and see if it will work

i am using the old one right now due to the fact of it being inegrated i just dont have the drivers installed because i tried to install the nevidia

[Alexalmighty502 Sup Acc]

how do you know your psu is 287.6?

[Mason]

i have opened up my computer and seen the label it says Total Wattage: 287.6

[Alexalmighty502 Sup Acc]

Diposting pertama kali oleh Anonymous:

i have opened up my computer and seen the label it says Total Wattage: 287.6

if the computer works fine until you install the gpu it might be that your computer is not powerful enough, most psus get weaker over time too

[Mason]

Diposting pertama kali oleh Alexalmighty502 Sup Acc:

Diposting pertama kali oleh Anonymous:

i have opened up my computer and seen the label it says Total Wattage: 287.6

if the computer works fine until you install the gpu it might be that your computer is not powerful enough, most psus get weaker over time too

would it cause the no signal problem if i didnt have enough power to power the gpu?

[pike]

no signal ,
check your cable , is the monitor set to the right input (dvi , hdmi ,vga )
in the bios you need to set the 730 as primary if you migrated from on chip

730 is real low power it gets all it needs from the slot

[Alexalmighty502 Sup Acc]

Diposting pertama kali oleh fauxtronic:

You probably need to go into the BIOS and set the display setting to PCI-Express.

Also, it's really not a good idea to use an underpowered PSU. You can wreck your computer (including the new graphics card) doing that.

the computer should switch to the gpu by itself and even if it doesnt it should use the igpu

[Mason]

Diposting pertama kali oleh pike:

no signal ,
check your cable , is the monitor set to the right input (dvi , hdmi ,vga )
in the bios you need to set the 730 as primary if you migrated from on chip

730 is real low power it gets all it needs from the slot

how was using hdmi and vga before on the integrated gpu and it worked fine so if i needed to switch the input on my monitor how would i do that. how do i set the 730 as my primary?

[Mason]

Diposting pertama kali oleh fauxtronic:

You probably need to go into the BIOS and set the display setting to PCI-Express.

Also, it's really not a good idea to use an underpowered PSU, particularly a cheap one because they always deliver less power than they claim. You can wreck your computer (including the new graphics card) doing that.

im sorry i dont know what BIOS are and i am planning on picking up a new psu once i get this working, and its the one that came with my pc.