Q_CODE 00 cpu led

[MA77Y†]

For a couple of weeks I have found this code "00" on the Q_CODE with the LED fixed in red and with the PC that does not show signs of wanting to start, it makes several attempts before the LED switches to green, at least two or three times it turns off and turns on again until it starts up completely. Once you have successfully booted the PC works great and without problems, the temperatures of the processor or other components are up to standard. I updated the BIOS but nothing, at startup the PC trips with this 00 and the LED in red. If you can give me a tip, some advice on what I could do and if I can do it, I would be grateful🙏🏼.

Components:
MB ASUS z590 E-gaming Wi-Fi
INTEL I7 11700K
NVIDIA RTX 3080ti OC
RAM G.SKILL 32gb 3600MHz
PSU ASUS ROG STRIX 1000w
Ssd m2 Samsung 980 pro 500gb
Ssd m2 Samsung 970 evo 250gb
Ssd drevo x1 480gb and another 1tb ssd

[MancSoulja]

Try clearing your CMOS.

If that doesn’t work try reflashing your BIOS.

[↑↑↓↓←→←→BASelect]

It means there is a problem with your cpu. Either a bad cpu a dirty socket or bent pin.

https://www.asus.com/support/FAQ/1043948/

[MancSoulja]

Αναρτήθηκε αρχικά από SnakeFist:

It means there is a problem with your cpu. Either a bad cpu a dirty socket or bent pin.

https://www.asus.com/support/FAQ/1043948/

00 DR. Debug can also mean corrupt BIOS.

Considering his system will boot eventually, it's not very unlikely to be a dead CPU or bent pins.

[↑↑↓↓←→←→BASelect]

Αναρτήθηκε αρχικά από MancSoulja:

Αναρτήθηκε αρχικά από SnakeFist:

It means there is a problem with your cpu. Either a bad cpu a dirty socket or bent pin.

https://www.asus.com/support/FAQ/1043948/

00 DR. Debug can also mean corrupt BIOS.

Considering his system will boot eventually, it's not very unlikely to be a dead CPU or bent pins.

Just going by what asus says. They know their error codes best. Q code 00 means abnormal cpu.

Troubleshootings for CPU abnormal. Q codes 00，D0.

1. Enter ASUS Download Center to check compatibility of the motherboard and the CPU：

a. Input the model name of the motherboard (Ex: ROG CROSSHAIR VII HERO), then choose the model name in the pull-down list, as shown below:

b. Please click [CPU / Memory Support], as shown below:

c. Click [CPU Support] and check if your CPU is in the QVL list for compatibility as shown below, and check if the BIOS version is as the recommended one or newer version than recommended.

2. Please try to re-install CPU and check if the CPU pin or CPU socket is dirty as shown below. If yes, please clean it and try again.

3. Check if any CPU pin is broken as shown below. If yes, please replace with a known good CPU..