Installera Steam
logga in
|
språk
简体中文 (förenklad kinesiska)
繁體中文 (traditionell kinesiska)
日本語 (japanska)
한국어 (koreanska)
ไทย (thailändska)
Български (bulgariska)
Čeština (tjeckiska)
Dansk (danska)
Deutsch (tyska)
English (engelska)
Español - España (Spanska - Spanien)
Español - Latinoamérica (Spanska - Latinamerika)
Ελληνικά (grekiska)
Français (franska)
Italiano (italienska)
Bahasa Indonesia (indonesiska)
Magyar (ungerska)
Nederlands (nederländska)
Norsk (norska)
Polski (polska)
Português (Portugisiska – Portugal)
Português - Brasil (Portugisiska - Brasilien)
Română (rumänska)
Русский (ryska)
Suomi (finska)
Türkçe (turkiska)
Tiếng Việt (vietnamesiska)
Українська (Ukrainska)
Rapportera problem med översättningen
1. Get Blue Yeti proprietary drivers from manufacturer.
2. Right click the tiny speaker avatar in right lower end of the screen and choose sound, then change the Yeti to default recording device and change it to 192kHz 24bit.
3. Disable the Blue Yeti in playback devices (unless you have headphones plugged into it).
4. Set to cardioid profile on the selector.
5. Set gain to just above halfway or to whatever sounds good on the monitoring.
6. On Teamspeak and SteamVR or whatever you use enable mic monitoring, that way you can adjust levels so teammates wont go deaf.
7. USE PTT ie push to talk, it is the best way, assign a button on the controller to it.
8. Make sure it is mounted away from main rig, which will vibrate.