NVidia Profile Inspector :: Help and Tips

Todas las discusiones > Foros de Steam > Help and Tips > Detalles del tema

RupertPigler 11 ABR 2018 a las 11:34 p. m.

NVidia Profile Inspector

I'm trying to use this software to create sli profiles but I can't get it to load.

NVidiaInspector.exe loads fine
NVidiaProfileInspector.exe does not

Nothing seems to happen after clicking on the .exe file or the link inside inspector. I've tried the following:

-current and older verions of the software
-reinstalling video card drivers
-reverting back to older video card drivers

I keep reading about people using it fine with similar set ups. Is there anyone willing to shed some light on my problem?

My system stats:

i7-8700k @ 5Ghz
MSI Z370 Godlike Gaming MB
32Gb Gskill DDR4 @ 3200 cl14
Samsung 960 EVO 256gb NVME (OS & Prod)
x2 Samsung 960 EVO 1tb NVME - RAID 0 (Games)
x2 Gigabyte Aorus GTX 1080ti Waterforce Extreme WB (SLI)
Triple rad custom loop keeping temps in mid 30's to low 40's under load
Windows 10 Pro

< >

Mostrando 1-9 de 9 comentarios

RupertPigler 12 ABR 2018 a las 9:49 a. m.

anyone have an idea?

Falsus Te Deum 12 ABR 2018 a las 9:54 a. m.

Perhaps post here?
https://steamcommunity.com/discussions/forum/11/
Or at Nvidia forums?

pike 12 ABR 2018 a las 10:00 a. m.

did you install nv inspector as/with admin rights ?
guru3d has forums for all things gpu , they're very good and the peeps there are real helpful with a huge knowledge base

RupertPigler 12 ABR 2018 a las 11:49 a. m.

Publicado originalmente por Falsus Te Deum:
Perhaps post here?
https://steamcommunity.com/discussions/forum/11/
Or at Nvidia forums?

posting everywhere I can think of that might be relevant. ty for the suggestions

RupertPigler 12 ABR 2018 a las 12:06 p. m.

Publicado originalmente por pike:
did you install nv inspector as/with admin rights ?
guru3d has forums for all things gpu , they're very good and the peeps there are real helpful with a huge knowledge base

it doesn't have an installer, just copy the folder and run the .exe in which case, yes, i did this as admin. I've posted on guru3d as well. hoping someone has had a similar situation and ended up with a fix

pike 12 ABR 2018 a las 12:22 p. m.

it's been awhile since i used it ,
i made a folder for it on the desktop , unpacked in there , then set the .exe in the folder to admin to run it .
i've been on ati for a few years now , so my memory might be off .
you'll get sorted out over at guru3d