transmitter support

[Decoy®]

game look good.
need some fix about transmitter support.
i run it with 9xr + usb dongle simulator ( like all kwad sim' on steam, then it work well.),
work great on all axis eccept for yaw that is not recognized.

another point is about xbox gamepad, with actually no setup option, stick have too much rate or/and less curve.

thanks.

[DCL]

hello decoy
in about a week we'll publish the transmitter calibration page that will solve the problem with your transmitter.

You can already adjust the gamepad sensitivity, in the drone tuning menu

thanks!

[teckn0]

This is probably due to how your dongle maps your RC channels. Using a Hobbyking dongle and a Devo8s (DeviationTX), I had to map AETR to channels 1236 from the transmitter.

[Decoy®]

Originally posted by DCL:

hello decoy
in about a week we'll publish the transmitter calibration page that will solve the problem with your transmitter.

You can already adjust the gamepad sensitivity, in the drone tuning menu

thanks!

thanks =)

[graham69parkinson]

I use a 9XR PRO running frsky protocol and most of the controls are fine except throttle, I can only fly if I set the center position because my throttle wont go all the way down after the setup. I know you say you unlocking the calibration box soon but most pilots like myself are finding the center position throttle horrid.

[Herbert Weirather]

Originally posted by graham69parkinson:

I use a 9XR PRO running frsky protocol and most of the controls are fine except throttle, I can only fly if I set the center position because my throttle wont go all the way down after the setup. I know you say you unlocking the calibration box soon but most pilots like myself are finding the center position throttle horrid.

Did you try to setup a new model on the 9XR with all endpoints set to default respectively to the endpoints you need in order to get the full deflection?

[graham69parkinson]

Yes I did create new model and that didn't help so I tried copying two other model setups that I use for DRL and Rotor Rush and the result is always the same, I don't get full deflection on my throttle. Like I said the sooner this calibration function arrives the better as I may hopefully be able to fly as it'll give me better feel.

[Decoy®]

yo.
transmitter controle update solve my yaw issue by remapping channel.
thanks DCL devs for that =)
now i have issue with throttle that it working fine before update... i have to push it to 50% for make propeller spin and so flying.
i trying again right now with pc reboot but problem is still here.
i have same issue on liftoff when they update transmitter calibration, i don't know where it from.
i using 9xr with hobbyking 9in1 dongle.
again it working fine on dcl before transmitter update.