Failed to create dump file (Error 183) Ошибка!!!!

[bonker_gnoyniy]

Недавно играл в кампанию, после каждого захвата территории выскакивала эта ошибка (Failed to create dump file (Error 183)), пробовал гуглить, но там этот LoL, пробовал поменять настройки графики... ничего не происходит... Скажите что делать потому что я уже под варпом, ничего непонятно. Спасибо)


(конфигурации пк: 8 гигов оперативки, i5-4440, Radeon r7 360)

[[EX] Shiores]

Originally posted by Bob$_KinG:

Недавно играл в кампанию, после каждого захвата территории выскакивала эта ошибка (Failed to create dump file (Error 183)), пробовал гуглить, но там этот LoL, пробовал поменять настройки графики... ничего не происходит... Скажите что делать потому что я уже под варпом, ничего непонятно. Спасибо)


(конфигурации пк: 8 гигов оперативки, i5-4440, Radeon r7 360)

Конфигурация не причем. Первым делом проверьте целостность игровых фалов(кеша).

[bonker_gnoyniy]

Originally posted by O.F.T.Sgt ShiOres:

Originally posted by Bob$_KinG:

Недавно играл в кампанию, после каждого захвата территории выскакивала эта ошибка (Failed to create dump file (Error 183)), пробовал гуглить, но там этот LoL, пробовал поменять настройки графики... ничего не происходит... Скажите что делать потому что я уже под варпом, ничего непонятно. Спасибо)


(конфигурации пк: 8 гигов оперативки, i5-4440, Radeon r7 360)

Конфигурация не причем. Первым делом проверьте целостность игровых фалов(кеша).

всё на месте, проверял уже

[Khanorama]

I've been having this same problem as well and it's completely stalled my campaign playthrough as Dark Eldar.

It apparently has something to do with the 32 bi application game code not being able to handle a small allocation of RAM buffer size allocated to it. It essentially runs out RAM memory storage at the end of each battle/campaign conquest. So far, Short of re-installing the game, not much has helped. :( The onlt modification I've done is to set the Hardware Cursor value to 0.

[Khanorama]

Ok So one small solution I found for these crashes (using win 10 64 bit home) is to download the Ntcore 2.0 executable over on mod-db

http://www.moddb.com/mods/ultimate-apocalypse-mod/downloads/nt-core-20

Just unzip and copy over the graphics config and Soulstorm exe over your originals in your game directory. (steamapps/common/dawnofwarsoulstorm/)

It supposedly allows the game to access more RAM from the available memory pool and prevents the error 183 from occuring on battle completeion.

For me, this basically involved playing as Dark Eldar, assaulting the Eldar homeworld stronghold on Karuva III (the desert planet) I had saved the game mid battle just before the last two base buildings were to be blown up and technically this winds up the battle and triggers the end battle cutscene. All would proceed normally and then the post battle screen (with wargear reward) was supposed to load up but it caused the error 183 at this point (when the 4 planets are shown on the loading flash screen) Tried a host of workarounds including verifying game cache, to setting compatability mode to windows 98/me, but nothing seemed to work.

NTcore 2.0 reswap basically allowed me to go past the error 183 crash and now I think I'll proceed normally in the campaign, thank god.

If I still experience further problems then I'll be sure to write that down below further.

Good luck, mates.

[Veter]

Originally posted by Khanorama:

Ok So one small solution I found for these crashes (using win 10 64 bit home) is to download the Ntcore 2.0 executable over on mod-db

http://www.moddb.com/mods/ultimate-apocalypse-mod/downloads/nt-core-20

Just unzip and copy over the graphics config and Soulstorm exe over your originals in your game directory. (steamapps/common/dawnofwarsoulstorm/)

It supposedly allows the game to access more RAM from the available memory pool and prevents the error 183 from occuring on battle completeion.

For me, this basically involved playing as Dark Eldar, assaulting the Eldar homeworld stronghold on Karuva III (the desert planet) I had saved the game mid battle just before the last two base buildings were to be blown up and technically this winds up the battle and triggers the end battle cutscene. All would proceed normally and then the post battle screen (with wargear reward) was supposed to load up but it caused the error 183 at this point (when the 4 planets are shown on the loading flash screen) Tried a host of workarounds including verifying game cache, to setting compatability mode to windows 98/me, but nothing seemed to work.

NTcore 2.0 reswap basically allowed me to go past the error 183 crash and now I think I'll proceed normally in the campaign, thank god.

If I still experience further problems then I'll be sure to write that down below further.

Good luck, mates.

Thanks man

[<PяØTi£F>]

I can confirm that this method worked for me as well.

[Khanorama]

good to know this helped some mates out.

[Salam Sussein]

thanks dude, now i play without this error

[Khanorama]

Just giving back to the community, friends.

[Kompoth]

Ty for this post, it helped me a lot.

I had this damned dump file bug and it ruined my campaign, so I followed Khanorama's link. It appears that the NT core patch is no more supported but I found that the same team released a Large Adress Aware patch and instructions.

Juste apply the LAA on Soulstorm.exe and Graphicconfig.exe and it will do the same thing as dl the two NT's exe, it flag them to support 4Gb of RAM.

I crushed the Imperial fortress for the third time and it worked perfectly.

[The Ćum Beast]

Thank you so much Khanorama and Kompoth

It was driving me mad!!!!!

[Buuh]

This helped me too, even if the Large Adress Aware patch says outdated on mod site, it works perfectly fine when applying it to both soulstorm exe and graphicsconfig. No more crashes for me.

Thanks

[Топ машин]

Originally posted by Khanorama:

Ok So one small solution I found for these crashes (using win 10 64 bit home) is to download the Ntcore 2.0 executable over on mod-db

http://www.moddb.com/mods/ultimate-apocalypse-mod/downloads/nt-core-20

Just unzip and copy over the graphics config and Soulstorm exe over your originals in your game directory. (steamapps/common/dawnofwarsoulstorm/)

It supposedly allows the game to access more RAM from the available memory pool and prevents the error 183 from occuring on battle completeion.

For me, this basically involved playing as Dark Eldar, assaulting the Eldar homeworld stronghold on Karuva III (the desert planet) I had saved the game mid battle just before the last two base buildings were to be blown up and technically this winds up the battle and triggers the end battle cutscene. All would proceed normally and then the post battle screen (with wargear reward) was supposed to load up but it caused the error 183 at this point (when the 4 planets are shown on the loading flash screen) Tried a host of workarounds including verifying game cache, to setting compatability mode to windows 98/me, but nothing seemed to work.

NTcore 2.0 reswap basically allowed me to go past the error 183 crash and now I think I'll proceed normally in the campaign, thank god.

If I still experience further problems then I'll be sure to write that down below further.

Good luck, mates.

wow dude, ty so much, i almost gave up but fortunately found ur solution. U r the best

[中國製造]

Originally posted by Khanorama:

Ok So one small solution I found for these crashes (using win 10 64 bit home) is to download the Ntcore 2.0 executable over on mod-db

http://www.moddb.com/mods/ultimate-apocalypse-mod/downloads/nt-core-20

Just unzip and copy over the graphics config and Soulstorm exe over your originals in your game directory. (steamapps/common/dawnofwarsoulstorm/)

It supposedly allows the game to access more RAM from the available memory pool and prevents the error 183 from occuring on battle completeion.

For me, this basically involved playing as Dark Eldar, assaulting the Eldar homeworld stronghold on Karuva III (the desert planet) I had saved the game mid battle just before the last two base buildings were to be blown up and technically this winds up the battle and triggers the end battle cutscene. All would proceed normally and then the post battle screen (with wargear reward) was supposed to load up but it caused the error 183 at this point (when the 4 planets are shown on the loading flash screen) Tried a host of workarounds including verifying game cache, to setting compatability mode to windows 98/me, but nothing seemed to work.

NTcore 2.0 reswap basically allowed me to go past the error 183 crash and now I think I'll proceed normally in the campaign, thank god.

If I still experience further problems then I'll be sure to write that down below further.

Good luck, mates.

I play the game with the new version of the Unification Mod: https://www.moddb.com/mods/unification-mod-dawn-of-war-soulstorm
and I always get the error if I play with 5 AI players. If I play with 3 AI playerss it works well.

[perduldo]

Originally posted by Khanorama:

Ok So one small solution I found for these crashes (using win 10 64 bit home) is to download the Ntcore 2.0 executable over on mod-db

http://www.moddb.com/mods/ultimate-apocalypse-mod/downloads/nt-core-20

Just unzip and copy over the graphics config and Soulstorm exe over your originals in your game directory. (steamapps/common/dawnofwarsoulstorm/)

It supposedly allows the game to access more RAM from the available memory pool and prevents the error 183 from occuring on battle completeion.

For me, this basically involved playing as Dark Eldar, assaulting the Eldar homeworld stronghold on Karuva III (the desert planet) I had saved the game mid battle just before the last two base buildings were to be blown up and technically this winds up the battle and triggers the end battle cutscene. All would proceed normally and then the post battle screen (with wargear reward) was supposed to load up but it caused the error 183 at this point (when the 4 planets are shown on the loading flash screen) Tried a host of workarounds including verifying game cache, to setting compatability mode to windows 98/me, but nothing seemed to work.

NTcore 2.0 reswap basically allowed me to go past the error 183 crash and now I think I'll proceed normally in the campaign, thank god.

If I still experience further problems then I'll be sure to write that down below further.

Good luck, mates.

It is 2022 and your solution still works!!! Thanks, mate!